Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa ASHT-A-100 ASHT-A Triaxial Acceleration Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: ASHT-A-100
The ASHT-A is an oil damping type triaxial acceleration transducer for accurate measurement possible due to little interference among axes.
Features
• Measurement from DC is possible.
• 3 acceleration transducers are within the same case, enabling measurement in X, Y, and Z axes.
• Minimal mutual interference between each axis, enabling high-accuracy measurement.
• Applicable to the analysis of acceleration in complex vibration phenomena
• TEDS-installed models are available. Inquiries are welcome.
Specifications
Performance
Rated Capacity | ±980.7 m/s2 (±100 G) |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 0.5 mV/V ±20% |
Environmental Characteristics
Safe Temperature | -15 to 65ºC |
---|---|
Compensated Temperature | 5 to 40ºC |
Temperature Effect on Zero | Within ±1% RO/ºC |
Temperature Effect on Output | Within ±1%/ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 2 V AC or DC |
Input Resistance | 120 Ω ±8.3% |
Output Resistance | 120 Ω ±8.3% |
Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M, 3 cables (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 300% |
---|---|
Frequency Response | DC and 20 Hz to 1.2 kHz*, ±5% (at 23ºC) *Specification is for single-axis of acceleration sensor before the sensor is integrated in outer case. |
Transverse Sensitivity | 2% RO or less |
Weight | Approx. 45 g (Excluding cable) |
Dimensions
Related Products
-
TONE CDS2 Stubby Screwdriver Set (Reversible Type)
-
SAKUSAKU 4SS-20D 8.0S Carbide Square End Mill 4-Flute
-
Kyowa BER-S-1MP79SA3Z30 BER-S-79SA3 Wall-surface Soil Pressure Transducer
-
Hammer Caster 909LK-POS Hammer Lock
-
Kyowa BL-1TB BL-B Hollowed Load Cell
-
Super Tool BRV44515-68025 Two Faces Jig Block (Valuable Type) For MC