Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: ASW-10A ASW-A
The ASW-A is an oil damping type waterproof acceleration transducer. It can withstand against water pressures up to 490 kPa.
Features
Measurement under water or ground possible
Corrosion-resistant models made of stainless steel are available.
TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity |
±98.07 m/s2(±10 G) |
Nonlinearity |
Within ±1% RO |
Hysteresis |
Within ±1% RO |
Rated Output |
0.5 mV/V or more |
Environmental Characteristics
Safe Temperature |
-15 to 65ºC |
Electrical Characteristics
Safe Excitation |
6 V AC or DC |
Recommended Excitation |
1 to 3 V AC or DC |
Input Resistance |
122 Ω ±1.6% |
Output Resistance |
122 Ω ±1.6% |
Cable |
4-conductor (0.08 mm2) chloroprene shielded cable,4 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M(Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads |
300% |
Frequency Response |
DC to 150 Hz at 23ºC (Sensitivity deviation ±5%) |
Transverse Sensitivity |
4% RO or less |
Water Pressure Resistance |
490.3 kPa |
Materials |
Case: Corrosion-resistant aluminum, anode oxidized coated |
Weight |
Approx. 40 g (Excluding cable) |
Dimensions