Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa BLW-A-2MN BLW-A Hollowed Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: BLW-A-2MN
The BLW-A is a hollowed load cell for measuring loads of VSL anchors, etc.
Features
• Eccentric loads, inner or outer loads causes less sensitivity deviation
• Thin & lightweight
• Water-proof structure (IP68 (IEC 60529) (Water pressure 0.5 MPa for 24 hours at 23ºC±15ºC))
Specifications
Performance
Rated Capacity | 2 MN |
---|---|
Nonlinearity | Within ±0.8% RO |
Hysteresis | Within ±0.5% RO |
Rated Output | 1.25 mV/V or more |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.05% RO/ºC |
Temperature Effect on Output | Within ±0.05%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±0.3% |
Output Resistance | 350 Ω ±2% |
Cable | 4-conductor (0.5 mm2) chloroprene shielded cable, 9.6 mm diameter by 1 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Degree of Protection | IP68 (IEC 60529)(Under 0.5 MPa water pressure, for 24 h at 23°C ±15°C) |
Weight | Approx.14.5 kg |
Dimensions
Related Products
-
Tosei Sharyo GLH Series Fixed Leg Gold Lifter
-
Vessel No.GT-NF15 Type-F Air Nipper
-
Kitz AKTAFO Type 600 Brass Ball Valves (Full Bore)
-
Obishi Keiki Seisakusho Digital Inclination Level PRO-3600 Model
-
Chiyoda Seiki TKR-170H/TKR-170H-H/MR-170H/MR-170H-H (Primary pressure: 20.0 MPa or less/adjustment pressure 2.0 to 12.0 MPa)
-
Tosei Sharyo SPH, SPSH Series Space Arm Gold Lifter