Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa CDV-44AS Strain /Voltage Measurement Isolation Card EDX Series Conditioner Card
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: CDV-44AS Strain /Voltage Measurement Isolation Card
- Conditioner card for EDX-200A and EDX-5000A
Feature
Can be selected according to the application. In addition to strain, voltage, acceleration, and temperature measurements, CAN data is also supported. Noise-resistant isolation amplifier cards and dynamic strain measurement cards are also available.
Specification
Measurement object | Strain gauge (4 gauge method) strain gauge type transducer, voltage |
---|---|
Number of input channels | 4 |
Input resistance | Approx. 10MΩ + 10MΩ (strain mode) Approx. 1MΩ (voltage mode) |
Input Format | Balanced differential input (strain mode) Unbalanced input (voltage mode) |
IMRR | 120dB(500×10-6At strain range) |
Gauge rate | 2.00 Fixed (strain mode) |
Response frequency range | DC coupling: DC~5kHz deviation +1dB, DC cut within -3dB (AC coupling): 0.2Hz (see Highpass Filter) |
Bridge Power Supply | DC 2V ± within 2% (strain mode) |
Range accuracy | ± within 0.3%FS |
Compatible bridge resistance | 120~1000Ω (strain mode) |
Measuring range | 500, 1k, 2k, 5k, 10k, 20k×10-6Strain, OFF (strain mode) 1, 2, 5, 10V, 20V, 50V, OFF (voltage mode) |
Equilibrium adjustment range | Within ±2.4%(±12000×10-6Strain) (when strain is measured) within ±5V (when voltage is measured) |
ZERO accuracy | Within ±0.3%FS (voltage OFF mode) |
Nonlinearity | ± within 0.1%FS |
Calibration value (CAL) | Output accuracy of 100% ± and 50% ± of each range: within ±0.3% FS |
Monitor output | Accuracy: ±5V ±0.5% ( ±5V for full scale of each range) |
Lowpass Filter | Transfer characteristics: Secondary Butterworth cutoff frequency: 2,10,30,100,300k,FLAT cutoff accuracy: -1±3dB Attenuation characteristics: (- 1±12)dB/oct. |
High-pass filter | Cut-off frequency : 0.2Hz attenuation characteristics : (-6±1)dB/oct. |
AD converter resolution | 16-bit |
Additional features | Reading information from sensors with built-in TEDS |
insulation | Between input and chassis (output), between channels: Withstand voltage DC500V for 1 minute |
Standard Accessories | Conversion connector FV-2A 4 pcs |
---|---|
Sold separately | Monitor output cable U-64Note ) When using a converter with remote sensing, connect it using a 4-core extension cable (N81~N85) for measurement. However, the remote sensing function cannot be used. |
Related Products
-
Akatsuki Seisakusho 06069192 Aluminum Level with Magnet
-
Vessel No.SS16H Recessed “SAKISUBO” Hex Bit
-
Asahi Weldex CS-V UP Multi Position Weaving Welding Carriage For Corner,Vertical-Up,T-BAR
-
Watanabe A9000 Series A9□1F AC voltage digital panel meter
-
Ross Asia Miniature series Port sizes 1/8″ and 1/4″. Flow rates up to 23 scfm (651 l/min)
-
Chiyoda Seiki Float Type Flow Meter/Dial Type Panel Flow Meter (Square Type)