Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa CTRS-100 Series Compact Recorder
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: CTRS-100 Series
CTRS-CVPS010A Voltage Measurement Unit
Feature
The compact recorder CTRS-100 series is compact, lightweight, and shock-resistant and supports various stress measurements regardless of installation location, from environments where space is limited and exposed to vibration and shock, such as motorcycle running tests and actual ship tests, to tabletop measurements.
- Modular for easy expansion and measurement of up to 128 channels
- High installation flexibility
- Impact resistance: 490 m/s2(50 G)
- Simultaneous sampling of all channels at 20 kHz (4 channels)
- Measurement of 100 channel at up to 1 kHz
- Wireless real-time monitoring is possible (when using a wireless LAN unit)
- Compatible with CAN/CAN FD (when using a CAN input unit)
Specification
Number of input channels | 4 (input circuit isolation) |
---|
Input Connector
Connector shape | NDIS4109 (Small 9-Pin Receptacle) Model: EPRC07-RX9FNDIS |
---|---|
Compatible plugs | NDIS4109 (Small 9-Pin Plug) Plug Model: EPRC07-P9MNDIS |
Measurement object | voltage |
---|---|
Sensor power supply | DC 5,10 V, OFF Accuracy: within ±0.2% Channel 1 and 2 can output up to 35 mA/channel, Channel 3 and 4 can output up to 15 mA/channel |
Input impedance | (1.8M Ω+1.8M Ω)±10% |
Input Format | Balanced differential input |
Measuring Range
Setting method | Arbitrary range method and OFF |
---|---|
Configurable range | Min: 0.2 V, Max: 50 V |
Configuration steps | 0.2~10 V 0.1 V step 10~50 V 1 V step |
Range accuracy | ± within 0.2%FS (ambient temperature 23±5 °C, 30 minutes of preheating time, applied to a stable temperature) |
---|---|
Nonlinearity | ± within 0.1%FS |
Temperature Stability
zero | Within ± (0.009%FS + 0.21 mV)/°C |
---|---|
sensitivity | Within ±0.03%/°C |
Time Stability
zero | Within ±0.05%FS/8h |
---|---|
sensitivity | Within ±0.3%/8h |
Zero Suppress
establishment | Select from ON, OFF, NONE for each channelON: Zero suppresses and sets the measured value to zeroOFF: NONE does not perform new zero suppress: Disable zero suppression and check the input voltage as it is |
---|---|
How to operate | Zero suppression execution operation from the control software or BAL switch operation of the dedicated remote control |
method | Autobalance (stored in nonvolatile memory) |
range | 0.2~0.9 V range: within ±5 V1~50 V range: within ±10 V |
precision | ± within 0.1%FS |
NONE precision | 0.2~0.4 V range: within ±1 mV or 0.5~50 V range: ±0.2%FS or less (ambient temperature 23±5°C, applied to a stable temperature after 30 minutes of residual heat) |
Input Range | ± within 60 V |
---|---|
Common-mode input voltage range | ± within 20 V |
Absolute Maximum Rating
input | ±70 V |
---|
Response frequency | DC~20k Hz (-20±3 dB at 1k Hz input) |
---|
Lowpass Filter
Transfer characteristics | 5th Butterworth |
---|---|
Cutoff frequency | Cut-off frequency when 10,20,50,100,200,500,1k,2k,5k,10k Hz,FLAT and AUTO FLAT settings are about 25k Hz Cutoff frequency when AUTO is set is 1/4 of the set sampling frequency |
Amplitude ratio at cutoff point | -3±1 dB |
Attenuation characteristics | -5±30 dB/oct when the cutoff frequency is less than or equal to 3k Hz, -5(+30, – 3) dB/oct when the cutoff frequency is less than 12k Hz. |
High-pass Filter
Cutoff frequency | 0.2,1 Hz and OFF |
---|---|
Attenuation characteristics | -6 dB/oct. |
AD conversion resolution | 24-bit |
---|---|
Sampling method | Simultaneous sampling of all channels |
Main unit display unit | Status LED,Channel Status LED |
Other Functions
TEDS | Read TEDS information and reflect it in the measurement conditions (only during online control by PC) |
---|
insulation | Input-to-GND (non-isolated channel), withstand voltage: 250 VAC, 1 min |
---|---|
power | Supplied via CTRS-100A or CTRS-BATT010A |
Power consumption | Approx. 3.1 W (with 12 VDC supply) |
Operating temperature and humidity range | -10~50°C, 20~90% (non-condensing) |
Storage temperature range | -20~60℃ |
Vibration resistance | 49.0 m/s2(5 G),5~200 Hz |
Impact resistance | 490 m/s2(50 G), 11 ms or less, half-sine wave |
Degree of protection | IP50(JIS C 0920/IEC 60529) |
External dimensions | 26.6(W) × 92(H) × 94(D) mm (excluding protrusions and protectors) |
mass | about 240 g |
Conformity directives | EMC Directive 2014/30/EU RoHS Directive 2011/65/EU, (EU )2015/863 (10 substances) |
Utility Nut | Size:M4, 6 places |
Standard Accessories | Connecting connector cap Connecting connector cap for female Input connector cap for
male 4 |
---|---|
Sold separately | 4109P-S32-7 (6-core shield) U-136 4109P-BNC plug U-137 4109P-BNC jack U-129
4109P-R05 jack U-138 |