Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa DTK-A-30 DTK-A Displacement Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: DTK-A-30
The DTK-A is a small-sized displacement transducer for both tension and compression measurement. A measuring scale provided.
Features
• Small and angular
• Easy installation
• TEDS-installed models are available.
Specifications
Performance
Rated Capacity | 30 mm |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.3% RO |
Repeatability | 0.3% RO or less |
Rated Output | 2.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -10 to 70ºC (Non-condensing) |
---|---|
Compensated Temperature | 0 to 60ºC (Non-condensing) |
Temperature Effect on Zero | Within ±0.05% RO/ºC |
Temperature Effect on Output | Within ±0.05% /ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 5 V AC or DC |
Input Resistance | 350 Ω ±3% |
Output Resistance | 350 Ω ±3% |
Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 3 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Frequency Response | DC to approx. 10 Hz |
---|---|
Measuring Force | Approx. 2 N |
Weight | Approx. 25 g (Excluding cable) |
Standard Accessories | Mounting plate: 1 Hexagon socket head bolt (M3×6): 2 Pin (φ2×20): 1 |
---|---|
Optional Accessories | Extension rod EB-50, EB-100 Mounting band FXB-30B Replacement probes X, XS, SH, H Magnet base MB-B |
Dimensions
Related Products
-
Kanetec RMWH-J1325 Additionally Workable Rectangular Permanent Magnetic Chuck
-
ENDO KOGYO SLG Self Lock
-
Niigata Seiki MT-30CMGKD Carpenter’s Square Kaidan with Magnets
-
Kanetec KBS Barrel Type Separator
-
Eagle Jack (Konno Corporation) JUB 40 Steel Type Holding Block
-
TSURUMI PUMP PARTS: BALL BEARING LOWER 50UTZ2.4S Parts & Accessories