Model Name | EDX-200A-4H (w/DCS-100A)EDX-200A-4H-0 EDX-200A-4H-1 (w/DCS-100A, DCS-101A) |
---|---|
Measurement object | Strain (gauge, transducer), voltage, thermocouple, pulse (F/V), piezoelectric acceleration (built-in amplifier), CAN signal, GPS |
Analog Input | EDX Series Conditioner Card Strain/Voltage/Acceleration Measurement Card CVM-41A Strain/Voltage Measurement Card CDV-40B/40B-F Dynamic Strain Measurement CardDPM-42B DPM-42B-F DPM-42B-I DPM-42B-I-F Thermocouple Card CTA-40A F/V Converter Card CFV-40A Charge Amplifier Card CCA-40A/40A-F CAN Card CAN-41A Strain/Voltage Measurement Isolation Card CDV-44AS/46AS DC constant current amplification card (120Ω) CDA-44AS DC constant current amplification card (350Ω) CDA-45AS AD converter card AD-40AS/40AS-F [Note] The CFV-40A has implementation limitations. |
CAN data input | CAN card (2 ports, maximum 256 channels): CAN-41A(*) CAN-41A can be mounted in the final slot |
Voice memo input | 1-channel (input voice memos can be recorded together with measurement data) Remote control unit RCU-42A (sold separately) Data playback software DAS-200A (sold separately) is used to play back recorded voice memos. |
sampling
Sampling method | All channels simultaneously |
---|---|
Sampling Mode | Normal: Acquire all channels at the same sampling frequency Dual: Acquire two different sampling frequencies per channel:fast or slow |
sampling frequency | In normal sampling mode [1/2/5 series] 1Hz~100kHz 1Hz~2kHz : When CAN-41A data is measured [2nSeries】 2Hz~65536Hz 2Hz~2048Hz :CAN-41A High-speed sampling (Sf) in dual sampling mode duringdata measurement [1/2/5 series] 1Hz~100kHz 1Hz~2kHz : CAN-41A data measurement [2 nSeries: 2Hz~65536Hz 2Hz~2048Hz : nSeries】 |
Measurable number of channels | 320000 in normal sampling mode / integer part of “set sampling frequency”, except 32 in
320000-channel dual sampling mode / integer part of “set sampling frequency”, but up to 64 channels of CAN data when |
Programmable sampling frequency | The high-speed sampling frequency in dual sampling mode below(320000/”number of channels”) is (320000/”number of channels”) or less * About the “high-speed + low-speed” setting channelTwo channels of acquired data per channel |
Digital Filters | Butterworth Filter (IIR) Filter Type: Low-pass Filter, High-Pass Filter Order: Number of Amplitudes at 1~8th Cutoff Point: -3dB Attenuation Characteristics: -6dB ×N dB/oct. (N is the order of the filter)* Can be used with a low-pass filter with a conditioner card Digital filter of CAN data cannot be applied |
---|---|
Data storage | CF Card Capacity : 128M~16GB (recommended by our company) Maximum data file size (data file size that can be acquired)
When the number of measurement repetitions is 1 time 4GB/1 data file When the number of measurement repetitions is 2 or more 1GB/1 data file ( 1GB=1000000000 bytes) |
Indicator | Channel status display LEDs: 32 LEDs for main unit status display: 7 LEDs for main unit status display: 1 |
Operation switch | UP,DOWN : Display switching REC/PAUSE on OLED display for status display : Start acquisition/stop acquisition stop : Stop acquisition BAL. : Balance (balance adjustment) LOAD : Read and set conditions from CF card. : Execute optional functions setID : EDX Identification Number Setting POWER : Power Switch USB/LAN : Communication I/F Switching |
External Control Connector | CONT IN , CONT OUT (remote control, for synchronous operation) |
Communication Interface | USB (USB2.0 High Speed) 1-Port Connector Shape : Series B Receptacle LAN (10/100BASE-T)2-Port LAN IN : LAN OUT for |
Synchronous operation | Number of synchronous operations with synchronous cable (N-128): 8 units Synchronous operation with LAN cable connection: 8 units |
How to set conditions | Online setting: Set on PC via LAN or USB interfaceOffline setting:
Set by reading the setting conditions in the CF card into the instrument (DCS-100A is used to create measurement conditions) |
Saving Conditions | Conditioner setting conditions and measurement conditions can be stored in EDX’s built-in nonvolatile memory, and data can be acquired immediately under the previous measurement conditions. |
Measurement mode
Manual measurement/trigger measurement/interval measurement | |
Manual measurement | It is possible to start and stop data acquisition by user operation, or stop acquisition with a set number of data, and record voice memos at the time of this measurement. |
Trigger measurement | Automatic acquisition function (Note) Triggering with CAN data acquired by CAN-41A is not possible under preset trigger conditions. |
Interval measurement | Combination of Measurement Modes in Dual Sampling Mode for Automatic Acquisition Function Under
Predetermined Interval Conditions: |
Start/Stop Acquisition | Executed by PC, operation switch (panel surface), dedicated remote control |
---|---|
Balance adjustment operation (balance operation) | Strain input channel balance adjustment is performed by a personal computer, operation switch (panel surface), or dedicated remote control. |
Acquired Data Format | Analysis is possible using the DAS-2A data analysis software sold separately in the KS200 Republican standard format. |
Data recovery | Online collection by PC or offline collection by reading CF card directly into PC |
TEDS function | [Compatible conditioner cards] CDV-40B(-F), DPM-42B(-F),DPM-42B-I(-F),CCA-40A(-F),CDV-44AS,CDA-44AS, CDA-45AS,CVM-41A |
power | DC 10~36V connector type : RM12BRD-4PH (Hirose Electric) DC power supply or AC adapter (sold separately) |
Current consumption | Approx. 2.6A (DC 12V, 40 CDV-4B mounted) |
Operating temperature range | 0~50℃ |
Operating humidity range | 20~90%(non-condensing) |
Storage temperature range | -20~60℃ |
Vibration resistance | 49.0m/s2 (5G), 5~55Hz 1 cycle 1 minute, 15 cycles per axis (non-operating) 29.4m/s2 (3G), 5~55Hz 1 cycle 1 minute, 15 cycles per axis (operating) |
Impact resistance | 196.1m/s2(20G)/11ms |
External dimensions | 165(W)×132.5(H)×255(D)mm not including protrusions |
mass | Main unit: Approx. 2.1kg (Approx. 40.4kg when two CDV-2B sheets are mounted) |
Standard Accessories | DC power cable P-76 USB cable N-38 ground wire P-72 Mounted in CF card (1GB) slot 8 fuse spare (rated current 3A) dummy panel * Installed in an empty slot at the time of shipmentEDX Accessory Bag Dynamic Data Acquisition Software DCS-100A (DVD) *If the model name ends with “-0”, the DCS-100A is sold separately. Instruction manual (Japanese/English, DVD) |
---|---|
Sold separately | AC Adapter for EDX-200A UEA360-1540 (SPU61A-106 15V for the US market) Fixed Adapter EDX Dummy Panel EDX1P-DUMMY Remote Control Unit RCU-42A EDX-100A / 200A instantaneous battery unit EDB-41B monitor unit EMON-20A synchronous cable N-128 |
Dimensions