,

Kyowa EGPC-40A GPS/Multi-Channel CAN Card Option card for EDX-200A-2H/4H/4T

Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: ECAN-40A Multi-Channel CAN Card

  • Measures CAN data and GPS information
  • Equipped with 8-bit digital input and output

Feature

An optional card for the EDX-200A that can measure CAN data and GPS information without reducing the number of analog channels or sampling frequency.

Specification

Compatible Models Mounted
in the option slot of EDX-200A-4H and EDX-200A-2H *When using with the EDX-200A-4T, use the dedicated option card EGPC-40A M72.
Number of input channels Up to 512
Supported CAN versions CAN2.0A/B (ISO11898, ISO11519-2 compliant)
Communication speed High speed CAN
1000/800/500/250/125/100/83.3/62.5/50/33.3/25/20/10[kbps]

Low speed CAN
125/100/83.3/62.5/50/33.3/25/20/10[kbps]

CAN data output Output at start: Output any CAN data at the timing of the start of the AD conversion operationOutput at stop: Output any CAN data

at the timing at the start of the AD conversion operationManual output:

Output arbitrary CAN data at any timingInterval output:
Output

arbitrary CAN data at a preset fixed cycle timing

Measured GPS data Latitude, longitude, altitude, direction of travel, speed, time, positioning status, number of satellites received, etc.
storage format: NMEA format
Time synchronization function Using Time Data Received from GPS Satellites to Match the EDX-200A’s Acquisition Start Time
Digital input and output
Number of input/output points Up to 8 points
Input/output settings Digital input/digital output/remote control input can be switched for each bit (common is common)
* Remote control input: Measurement start/stop, BAL execution, etc. are possible.
Input Format Isolated (digital isolator type), TTL level input
Input voltage DC max 5V
Output format Isolated (digital isolator type), open-collector type output
(with 10kΩ internal pull-up resistor)
Output voltage DC 5V
Output current Up to 1mA (per point)
Operating temperature range 0~50°C
*EGPC-40A M72 is -20~65°C.
Operating humidity range 20~90%(non-condensing)
Storage temperature range -20~60°C
*EGPC-40A M72 is -30~70°C.
External dimensions 22.0mm(W)×128.0mm(H)×221.5mm(D)
mass Approx. 170g
Conformity directives RoHS Directive 2011/65/EU,(EU) 2015/863(10 substances)
Note: When performing four arithmetic operations using the EDX-200A and DCS-101A, CAN measurement cannot be performed at the same time.
Standard Accessories Connector plug for digital input/output port 1 x GPS sensor (cable length: 5m)
shell case 1 x

CANdb file reader DCS-105A

Remarks

* When GPS data acquisition and real-time arithmetic operations are used together, DCS-101A and DCS-104A are combined.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top