Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa EP-17heat-cured Glue
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: EP-17heat-cured
In order to obtain good measurement data, the strain gauge must be fully bonded to the material under measure.
It is important to choose and use an adhesive that is suitable for the material to be measured, the material of the gauge base, and the measurement conditions.
*This is an external site.
Specification
type | heat-curing |
---|---|
Operating temperature range | -50~170 |
Main applicable materials | ・Metals (iron, stainless steel, copper, aluminum alloy, etc.) |
Hardening conditions | ・Heat curing by tape pressure after acupressure →130°C 2 hours→ 150°C 2 hours |
classification | 1 epoxy system, 1 powder mixed type |
capacity | 30g |
forte | ・Adhesive for semiconductor strain gauges (KSNB-2-120-E5). (Small shrinkage during curing) |
Main applicable gauges | KSNB-2-E5 |
Remarks
Note: The operating temperature range is the adhesive itself and varies depending on the combination with the gauge. Before use, please read the attached instruction manual carefully before use.
Related Products
-
Shinano SI-SG40E-6L/SI-SG40E-6L-6 (6mmCollet model)/SI-SG40E-6L-Q (1/4″Collet model) Die Grinders Standard Model Industral Air Tools
-
Tanaka Scale TT-SUS Type
-
Sawada LC-W type Level gauge – Wide Liquid Chamber Level Gauge
-
Automatic Ultrasonic Flaw Detector For Burn Cracking
-
Kyowa ASE-A-100 ASE-A Damped Acceleration Transducer for Crash Test
-
Hammer Caster 400 F0S/419 F0S 100-150mm Caster