Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa EP-34B Ambient curing or heat curing Glue
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: EP-34B Ambient curing or heat curing
In order to obtain good measurement data, the strain gauge must be fully bonded to the material under measure.
It is important to choose and use an adhesive that is suitable for the material to be measured, the material of the gauge base, and the measurement conditions.
*This is an external site.
Specification
type | Room temperature curing or heat curing |
---|---|
Operating temperature range | -55~200 |
Main applicable materials | ・Metals (iron, stainless steel, copper, aluminum alloys, etc.), plastics (acrylic, PVC, etc.),
composite materials (CFRP, GFRP, printed circuit boards, etc.) |
Hardening conditions | ・Tape pressurization is also possible at pressurized state (30~50kPa) at about 25°C for 24 hours or at 80°C for 2 hours . |
classification | Epoxy two-component mixed type |
capacity | 30.8g (Main agent: 5.6g×4 bottles, Hardener: 2.1g×4 bottles) |
forte | ・Suitable for bonding strain gauges and sensor strain gauges in strain measurement up to the medium temperature range. |
Main applicable gauges | KFRPB KFP KFHB |
statute | Non-medical deleterious substances |
Remarks
Note: The operating temperature range is the adhesive itself and varies depending on the combination with the gauge. Before use, please read the attached instruction manual carefully before use.