- Home
- Products
- Kyowa KFRPB120Ω 3-axis planar arrangement Foil strain gauge for KFRPB composite materials
Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa KFRPB120Ω 3-axis planar arrangement Foil strain gauge for KFRPB composite materials
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
The KFRPB series foil strain gages are self-temperature-compensation gages (SELCOM gages) suitable for strain measurement of composite materials such as CFRP and GFRP.
The special gage pattern minimizes the effect of self-heating due to gage current and the effect of reinforcement of low-elasticity materials.
To ensure accurate measurement by avoiding the self-heating effect of gage current, consider the following:
1. Select a lower excitation voltage on a measuring instrument.
2. Active-dummy system
3. 350Ω strain gages
Specifications
model name | Dimensions (mm) | |||
---|---|---|---|---|
gauge (grid) | base | |||
length | width | length | width | |
KFRPB-5-120-D22-1 | Five | 1.4 | 19 | 19 |
KFRPB-5-120-D22-3 | Five | 1.4 | 19 | 19 |
KFRPB-5-120-D22-6 | Five | 1.4 | 19 | 19 |
KFRPB-5-120-D22-9 | Five | 1.4 | 19 | 19 |
KFRPB-2-120-D22-1 | 2 | 1.2 | 15 | 15 |
KFRPB-2-120-D22-3 | 2 | 1.2 | 15 | 15 |
KFRPB-2-120-D22-6 | 2 | 1.2 | 15 | 15 |
KFRPB-2-120-D22-9 | 2 | 1.2 | 15 | 15 |
Order in units of 10 pieces
Major Properties
Materials Resistive element | NiCr alloy foil |
---|---|
Materials Base | Polyimide |
Operating temperature in combination with major adhesives after curing (°C) | EP-34B: -55 to 200ºC CC-33A: -196 to 120ºC |
Operating temperature in combination with major leadwire cables (°C) | Polyester-coated copper wire: -196 to 150ºC Vinyl-coated flat cable (L-6, L-7, L-9, L-10): -10 to 80ºC Mid-temperature cable (L-11, L-12): -100 to 150ºC Fluoroplastic-coated high/low-temp. 3-wire cable (L-3): -196 to 200ºC |
Self-temperature-compensation (°C) | 0 to 150ºC |
Applicable linear expansion coefficients (×10-6/℃) | 1, 3, 6, 9 |
Strain limits at normal temp. (approx. %) | 2.2 |
Fatigue lives at normal temp. (times) | 1×106 (±1500μm/m) |
Relative images
Contents
When ordering, suffix the lead-wire cable code to the model number with a space in between.
E.g.
For the gage with 2 polyester-coated copper wires 15 cm long
→ KFRPB-5-120-C1-1 N15C2
For the gage with a vinyl-coated flat 3-wire cable 5 m long pre-attached
→ KFRPB-5-120-D22-3 L5M3S
If no lead-wire cable code is suffixed, the gage is delivered with gage leads only.
(Silver-covered copper wires 25 mm long)
Related Products
-
Kanetec PCMH2-D-A/TD-A MAGNETIC FILTER FOR VISCOUS AND HEAT-RESISTANT LIQUID
-
Kakuta Variclamp No.1 Hold Down Clamp
-
Tokyo Keiso VDT Series Water-Cone Flowmeter
-
Nitta Tooling
-
Chiyoda Seiki GS-140LS/GS-140LS-H Medium Flow Self-powered Pressure Regulator (Primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 150 m3/h・Air)
-
KONAN AB2C Tank Bottom Sanitary Valves Air-operated