Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LMC-A-10KN LMC-A compact compression load cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LMC-A-10KN
Compact and lightweight compression load cell.
Features
●High output and high accuracy
●Easy to install
●Suitable for load measurement when the measurement location and load cell mass are limited.
Specification
Performance
| Rated capacity | 10 kN |
|---|---|
| non-linearity | Within ±0.5% RO |
| hysteresis | Within ±0.5% RO |
| repeatability | 0.5% RO or less |
| Rated output | 1.5 mV/V (3000×10 -6 strain) or more |
Environmental characteristics
| Allowable temperature range | -10 to 80℃ |
|---|---|
| Temperature compensation range | 0 to 70°C |
| Temperature effect on zero | Within ±0.05% RO/°C |
| Temperature effect on output | Within ±0.05%/°C |
Electrical characteristics
| Allowable applied voltage | 7V AC or DC |
|---|---|
| Recommended applied voltage | 1-6V AC or DC |
| input resistance | 350Ω±2% |
| output resistance | 350Ω±2% |
| cable | 0.035mm 2 , 4-core shielded vinyl 2m, outer diameter 1.7mm, bare tip (shield not connected to main unit) |
mechanical properties
| Allowable overload | 150% |
|---|---|
| natural frequency | about 38 kHz |
| mass | About 6g (not including cable) |
| Material | stainless steel |
| Degree of protection | IP64 (JIS C 0920) |
Dimensions
For proper use
Due to its small size and high capacity, the surface pressure of the mounting surface is high at the rated load.
Use a metal with HRC40 or higher, such as SUS630-H900, for the mounting base material.
Examples of recommended materials
・Metal material: HRC (35 to 38) SCM440, etc.
・Mounting surface material: HRC40 or higher, SUS630-H900, SCM440, etc.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
