Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LPR-C-1KNS25 LPR-C Thin Pedal Force Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LPR-C-1KNS25
Easy mounting applicable different pedal configurations and offset load provide low output errors.
Features
The thin, lightweight design slightly affects operation feel, enhancing portability but raising durability concerns.
Easy installation enables simple mounting to a range of shapes of brake pedal.
Thin profile, thickness 12mm
Minimal error by off-set load
Specifications
Performance
Rated Capacity | 1 kN |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.3% RO |
Rated Output | Approx. 0.9 mV/V |
Environmental Characteristics
Safe Temperature | -10 to 70ºC (Non-freezing or Non-condensing) |
---|---|
Compensated Temperature | 0 to 50ºC (Non-freezing or Non-condensing) |
Temperature Effect on Zero | Within ±0.05% RO/ºC |
Electrical Characteristics
Safe Excitation | 8 V AC or DC |
---|---|
Recommended Excitation | 1 to 5 V AC or DC |
Input Resistance | 240 Ω ±3% |
Output Resistance | 240 Ω ±3% |
Insulation Resistance | 500 Ω (50 VDC) or more |
Cable | (Shield wire is not connected to mainframe) 0,05 mm2 4-conductor vinyl shielded cable 3 m long, φ2,5 mm terminated with connector plug PRC03-12A10-7M |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Degree of Protection | IP20 (JIS C0920/IEC60529) |
Materials | Aluminum alloy |
Exterior | Alumite treatment (loading surface and mounting surface) |
Weight | Approx. 110 g (Excluding cable) |
Standard Accessories | Attachment (LPR-C-S15-J1/Approx. 6 g) 1set Countersunk screw (M3×4) 4 pcs Hook and loop fastener 1 m |
---|
Related Products
-
Kurimoto CFM-16 Forging Press
-
NAC – AL TYPE 20 Stainless steel (SUS304) SM (Male thread)
-
Nippon Chemical Screw PVC/W(d-D-t) PVC/washer
-
RIKIMAN GIII Type Clamp
-
KITAGAWA FG-L series Advanced Chuck
-
Chiyoda Seiki EPR-1000PH Primary Pressure Control Valve Holding Pressure Valve (primary pressure: 20.0 MPa or less/set pressure 10.0 to 20.0 MPa, standard flow rate: 170 m3/h・Air)