TSC-6FB
| Object Product Model | LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID |
|---|
TSC-6MB
| Object Product Model | LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID |
|---|
Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LUX-B-5KN-ID LUX-B-ID Compact Tension/Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LUX-B-5KN-ID
The LUX-B-ID is a compact stainless-steel load cell with waterproof connector for measuring tension or compression loads. Models for withstand to repeated bending (Flexible cable) are available.
Features
• High sensitivity
• Easy installation
• TEDS installed
Specifications
Performance
| Rated Capacity | ±5 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | 1.3 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80ºC |
|---|---|
| Compensated Temperature | -10 to 70ºC |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Dedicated Connection Cable | TE-45 |
| Cable | 6-conductor (0.08 mm2) chloroprene shielded cable, 4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Natural Frequencies | Approx. 18 kHz |
| Recommended Tightening Torque | Approx. 80 N·m |
| Materials | SUS (Metallic finish) |
| Weight | Approx. 260 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Mount base CX Ball joint TU Whirl-stop coupling TSC Whirl-stop brackets TS |
|---|
Dimensions
Mount Base
CX-6
| Object Product Model | LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID |
|---|---|
| Weight (Approx.) | 350 g |
Whirl-stop Couplings
Whirl-stop Brackets
TS-6B
| Object Product Model | LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID |
|---|
Ball Joint
TU-18B
| Object Product Model | LT-1TFH LT-1TFL LUX-B-5 to 20KN-ID |
|---|---|
| Weight (Approx.) | 300 g |
To Ensure Safe Usage
- If impacts are expected in receiving tension loads, select a load cell with the rated capacity higher by one rank than the operating load.
- Pay attention to strength of fastened parts which is screwed into the LUX-B.
- When using the LUX-B with rated capacity more than 2 kN or more, use the fastened parts made of a material with tension strength more than 800 N/mm2.
- Typical recommended material: SUS630 (H900) HRC40 to 47, SCM435 HRC30 to 38
- For tensile load measurement, take care never to exceed the safe overload rating.
Related Products
-
Kitz Class 125 Bronze Gate Valve
-
Ross Asia No.95 Series NAMUR valve series
-
Chiyoda Tsusho H-10P/20P/30P High Cock One-Touch Joint Nipple (Male Screw)
-
TAIYO L-A2M25(30) Series Shock Absorber (Low speed L type）
-
Tosei Sharyo SJ-KS Series Gold Caster
-
Line Seiki KZ Series Ratchet / Revolution / Direct Drive Counter
REQUEST QUOTATION
PAYMENT
LINK
