Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PD-1KA PD-A Differential Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PD-1KA
The PD-A is a differential pressure transducer for accurate measuring slight differential pressures. The max line pressure is 2.94 MPa. It can be used not only for differential pressure measurement, but also flow rate measurement.
Features
• Suitable for long-term measurement
• For indication and control of automation systems
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | 100 kPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.2% RO |
Rated Output | 1.5 mV/V ±1% |
Environmental Characteristics
Safe Temperature | -10 to 70ºC |
---|---|
Compensated Temperature | 0 to 60ºC |
Temperature Effect on Zero | Within ±0.01% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 350 Ω ±0.5% |
Output Resistance | 350 Ω ±0.5% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads | Differential pressure 150% |
---|---|
Natural Frequencies | Approx. 400 Hz |
Maximum Line Pressure | 2.94 MPa |
Weight | Approx. 5 kg (Excluding cable) |
Dimensions
Remarks
When A side is a high pressure, plus output.
When B side is a high pressure, minus output.
(For A-side and B-side, see the dimension below.)
Note: Copper alloy is used for liquid-contacting part.
Avoid measuring corrosive liquid or gas.