Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PGM-500KH PGM-H Small-sized Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PGM-500KH
The PGM-H is a small-sized pressure transducer with the semi-flush diaphragm at the end.
Features
• Highly accurate
• High frequency response
• Various rated capacities
• TEDS-installed models are available.
Specifications
Performance
Rated Capacity | 50 MPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.2% RO |
Repeatability | 0.15% RO or less |
Rated Output | 2 mV/V or more |
Environmental Characteristics
Safe Temperature | -20 to 70ºC |
---|---|
Compensated Temperature | -10 to 60ºC |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.02%/ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 350 Ω ±2% |
Output Resistance | 350 Ω ±2% |
Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 3 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 174 kHz |
Material | Case: Stainless steel Liquid-contacting part: SUS 630 |
Weight | Approx. 65 g (Excluding cable) |
Degree of Protection | IP64 (IEC 60529) |
Mounting Screw | G3/8, male |
Standard Accessories | Gasket (Mild copper) |
---|
Dimensions
Related Products
-
Tohnichi QSPLS/CSPLS/QRSPLS/SPLS/SPLS-MH/RSPLS/RSPLS-MH/SPLS-N Pokayoke Torque Wrench
-
Vessel No.GT-NR5 Air Nipper Round-Type without Lever
-
SAKUSAKU 4SS-6.0-R1 Carbide Radius End Mill 4-Flute
-
Shinano SI-1460 1/2″ Impact Wrench Standard Air Tools
-
YOSHITAKE GP-1010T Pressure Reducing Valve – Air
-
Flex System Anchor