Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PHL-A-30MP-B PHL-A Small-sized High/Low-temperature Pressure Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PHL-A-30MP-B
The PHL-A is a compact & lightweight pressure transducer with the semi-flush diaphragm at the end. It is suitable for measurement under high or low temperature.
Features
• High stability
• High frequency response
• There are 2 types: A type with removable cable and B type with integrated cable
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | 30 MPa |
---|---|
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.2% RO |
Repeatability | 0.2% RO or less |
Rated Output | 2 mV/V ±20% |
Environmental Characteristics
Safe Temperature | -196 to 210ºC (Connector plug: -25 to 85ºC) |
---|---|
Compensated Temperature | -196 to 200ºC (Connector plug: -25 to 85ºC) |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.03%/ºC |
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 350 Ω ±2% |
Output Resistance | 350 Ω ±2% |
Cable | 4-conductor (0.08 mm2) fluoroplastic shielded cable, 3.1 mm diameter by 30 cm long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Natural Frequencies | Approx. 250 kHz |
Material | Liquid-contacting part: SUS 630 Screw part: Nickel plating |
Weight | Approx. 20 g (Excluding cable) |
Degree of Protection | IP64 (IEC 60529) |
Mounting Screw | G1/8, male |
Standard Accessories | Gasket (Mild copper) (SS-105 O-ring is also usable.) |
---|
Dimensions
Related Products
-
Eddyfi Technologies MANTIS Phased Array Ultrasonic Flaw Detection System
-
Kyowa BEF-A-200KP BEF-A Soil Pressure Transducer
-
H.H.H Ring Catch LCS
-
Watanabe WVP-NHL 2-point setting alarm setter with LCD display – Signal Converter
-
Flex System S Cap For Inserts
-
SAKUSAKU 4SS-40D 12.0S Carbide Square End Mill 4-Flute