Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa PS-10KC PS-C Miniature Pressure Sensor
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PS-10KC
The PS-C is a miniature pressure sensor with a strain-gage bridge inside. The cable direction is parallel to the sensor surface.
Features
• Ultra-thin
• Installed by adhesives
• Suitable for distributed pressure measurement by using multiple units
Specifications
Performance
| Rated Capacity | 1 MPa |
|---|---|
| Nonlinearity | Within ±1% RO |
| Hysteresis | Within ±1% RO |
| Rated Output | 1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%. |
| Cable Direction to Sensing Surface | Horizontal |
Environmental Characteristics
| Safe Temperature | -20 to 70ºC |
|---|---|
| Compensated Temperature | 0 to 50ºC |
| Temperature Effect on Zero | Within ±0.2% RO/ºC |
| Temperature Effect on Output | Within ±0.2%/ºC |
Electrical Characteristics
| Safe Excitation | 3 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 2 V AC or DC |
| Input Resistance | 350 Ω ±10% |
| Output Resistance | 350 Ω ±10% |
| Cable | Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Natural Frequencies | Approx. 37 kHz |
| Weight | Approx. 0.5 g (Excluding cable) |
| Materials | Metallic finish |
| Dedicated Adhesive | RC-19 (Request the RC-19 when ordering the transducer.Cost option) |
| Compliance | Directive 2011/65/EU, (EU) 2015/863 (10 restricted substances) (RoHS) |
Dimensions
Related Products
-
Hammer Caster 434MB-FHU Urethane Thermoplastic Wheel
-
TONE HH208S Short Hexagon Socket Set (with Socket Holder)
-
Ascon alumina Abrasive
-
SANYUTEC Flange For SM, SHF, SHD, SHT-Type Compact Drive Shaft Universal Joint
-
Koizumi Sokki S500 Absorption Meter/Oil Absorption Meter
-
Kawasaki KPT IMPACT WRENCH For 1″ & 1-1/2″ sq.drive – Straight type
REQUEST QUOTATION
PAYMENT
LINK
