Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: PVL-300KA

The PVL is a voltage-output pressure transducer with a built-in amplifier. It is strong against noise. 2 types are available, PVL-A/B is a cable-integrated one and PVL-C/D a connector-equipped one. PVL-B/D output 0 to 5 V, and PVL-A/C output 1 to 5 V.

Features

• Compact & lightweight
• High frequency response
• Measure pressure of high viscous medium possible

Specifications

Performance

Rated Capacity	30 MPa
Nonlinearity	Within ±0.3% RO
Hysteresis	Within ±0.3% RO
Voltage Output	1 to 5 V

Environmental Characteristics

Safe Temperature	-20 to 70ºC
Compensated Temperature	-10 to 60ºC
Temperature Effect on Zero	Within ±0.03% RO/ºC
Temperature Effect on Output	Within ±0.03%/ºC

Electrical Characteristics

SN Ratio	50 dB or more
Load Resistance	1 kΩ or more
Frequency Response (Built-in Amplifier)	DC to 1 kHz (Sensitivity deviation: ±10%)
Power Supply	12 VDC (10.5 to 15 V), 30 mA or less
Cable	4-conductor (0.14 mm2) chloroprene shielded cable, 6 mm diameter by 30 cm long, bared at the tip (Shield wire is not connected to the case.)

Mechanical Properties

Safe Overloads	150%
Materials	Case: SUS (Metallic finish) Liquid-contacting part: SUS 630
Weight	Approx. 85 g (Excluding cable)
Degree of Protection	IP52 (JIS C 0920/IEC 60529)

Standard Accessories	Gasket (Mild copper)

Dimensions