Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa Slip-ring Type Wheel Torque Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
●Measure wheel torque while the automobile is in motion
●Slip-rings ensure easy handling.
●Can be used for braking tests and traction control operation tests
●Thin and light
●Simultaneous output of rotation angle is possible by installing an angle detector (optional)
Features
The wheel torque transducer is designed to measure torque generated around the wheel of a running vehicle.
It consists of a strain gage transducer, a signal transmitter (slip-ring), dedicated wheel and hub adapters.
The wheel and hub adapter are replaced to enable the transducer to be applied to various types of vehicles.
The wheel torque transducer is suitable for drive and brake tests as well as traction control tests.
Specifications
Performance
Rated Capacity | 1 to 5 kN·m (Rated capacities other than above are available, please contact us.) |
---|---|
Nonlinearity | Within ±0.5% RO |
Hysteresis | Within ±0.5% RO |
Environmental Characteristics
Safe Temperature | -10 to 80ºC |
---|---|
Compensated Temperature | 0 to 70ºC |
Applicable PCD and Number of Holes | PCD100 to 120 as specified, 4 or 5 holes For other PCD and number of holes, please contact us. |
Applicable Wheel Size | According to specifications (14 to 20 inches) For other wheel sizes, please contact us. |
Electrical Characteristics
Safe Excitation | 15V AC or DC |
---|---|
Recommended Excitation | 1 to 10V AC or DC |
Cable | Terminated with a connector plug PRC03-12A10-7M |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Rotary Speed | Max. 2000 rpm |
Installateion | The transducer is mounted to the tire via the dedicated wheel and to the axle via the hub adapter. |
Weight | Approx. 4 kg (For 2.5 kN∙m) |
Degree of Protection | IP44 (IEC 60529) (Drip-proofed by protective coating) |