Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa TPS-A-500NM TPS-A Built-in Amplifier Torque Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: TPS-A-500NM
The TPS-A is a compact & lightweight torque transducer with buit-in amplifier. Easy maitenance due to noncontact transmission.
Features
• Built-in amplifier, ±5 V output.
• Rotation speed output: 4 pulses per rotation
• Applicable to a friction-joint coupling (Excluding TPS-A-5KNM)
• Compact and lightweight, good for in line layout (30 mm in width, TPS-A-1NM, 2NM)
Specifications
Performance
Rated Capacity | ±500 N·m |
---|---|
Rated Output | 5 V ±4% (Load resistance 5 kΩ or more) |
Nonlinearity | Within ±0.3% RO |
Hysteresis | Within ±0.3% RO |
Environmental Characteristics
Safe Temperature | -10 to 70ºC (Non-condensing) |
---|---|
Compensated Temperature | -10 to 60ºC (Non-condensing) |
Temperature Effect on Zero | Within ±0.03% RO/ºC |
Temperature Effect on Output | Within ±0.05%/ºC |
Electrical Characteristics
Cutoff Frequencies of AMP | 500 Hz (-3 ±2 dB) |
---|---|
SN Ratio | 45 dB or more |
Power Supply | 10 to 16 VDC |
Current Consumption | 0.5 A or less (When power supply is 12 VDC) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Max. Speed | 5000 rpm |
Rotational Output | 4 pulses per rotation (Open collector, no rotary directions) |
Degree of Protection | IP40 (IEC 60529) |
Safe Bending Moment | 150 N·m (Transducer only) |
Safe Load at Shaft End | 800 N |
Moment of Inertia | 2.30×10-3kg・m2 |
Weight | Approx. 9 kg |
Optional Accessories | Couplings: SFF-140SS-K-45K-ΔK∂ Note: Δ is the other part of shaft’s diameter, ∂ is the tolerance on the hole. (Blank: h7, K: k6, M: m6, J: j6, S: 35+0.010 to 0) For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable BNC plug to 2 alligator clips cable(For details, contact us.), Output cable U-59 (1.5 m, BNC to BNC) For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable BNC plug to 2 alligator clips cable(For details, contact us.), Output cable U-59 (1.5 m, BNC to BNC) For 24 VDC power supply: Power cable for 24 VDC P-80(For converting the power supply 24 VDC into 12 VDC.), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable BNC plug to 2 alligator clips cable(For details, contact us.), Output cable U-59 (1.5 m, BNC to BNC) |
---|