Japan, LOBTEX
LOBTEX FSH20 Manual Hydraulic Flaring・Swaging Tool
Made in Japan
Manufacturer: LOBTEX CO., LTD.
Model: FSH20
For both flaring and swaging
Applicable with new R410A coolant
Enables quick flaring/swaging of pipes when the tip of the pipe is set in alignment with the gauge front surface.
Use/Application
Compact design with a weight of 1,450 g.
Rotating the tool 180° improves work efficiency.
Specifications
| Model No. | (Product) weight | Set details | Use range | Retail/User prices | Remark |
|---|---|---|---|---|---|
| FSH20 | 3740g | HY20、FTH20G、HFR45、SD5S | （for Copper pipe・45°）1/4″・3/8″・1/2″・5/8″・3/4″ | open price | Metal case size：200×250×65mm |
IMPORTANT SAFETY INSTRUCTIONS
Before work, remove burrs from the pipe cut surface. If deburring is insufficient, inadequate processing may result. Remove burrs completely.
Tighten the gauge securely using the shaft included with the tool. If tightening is insufficient, the desired work surface may not be obtained.
Make sure that the gauge securely fits in the groove of the body yoke. If the gauge does not completely fit in the groove, it may come off during work.
CAUTIONS ON INSCRIBED VALUES
Since dimensions, weights, etc. are nominal, there possibly are changes of some numerical values.
Specifications may be changed for improvement of the product without prior notices.
Listed prices do not include VAT. Please ask our distributor in case of purchases.
Related Products
-
Tohnichi CEM3/CEM3-G Digital Torque Wrench
-
Watanabe WGP-DS Isolator – Signal Converter
-
SAKUSAKU 4SS-30D 9.0S Carbide Square End Mill 4-Flute
-
H&F Trial Press
-
Chiyoda Tsusho FR4/6/8/10/12 L Connector
-
Chiyoda Seiki TKR-120H/TKR-120H-H/MR-120H/MR-120H-H (Primary pressure: 20.0 MPa or less/adjustment pressure 2.0 to 12.0 MPa)
