Maeda Koki
Maeda Koki MK Type Air Signal

Made in Japan
Manufacturer: Maeda Machinery Research Institute Ltd.
Model: MK Type
Features
Flow is visible at a glance This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
The flow rate cannot be confirmed. Can be installed in any direction
Since it uses a spring inside, it can be installed facing up, down, sideways, etc.
Model list
Model | Dimensions (mm) | Standard specification flow rate (L/min) | |||
---|---|---|---|---|---|
Connection port size | Full length | Overall width | Minimum | Maximum | |
MK15-1TA | Rc1/8 | 50 | 15 | 6 | 30 |
MK25-1TA | Rc1/8 | 68 | 25 | 30 | 100 |
MK25-2TA | Rc1/4 | 68 | 25 | 30 | 100 |
MK25-3TA | Rc3/8 | 74 | 25 | 30 | 100 |
MK30-2TA | Rc1/4 | 90 | 30 | 60 | 300 |
MK30-3TA | Rc3/8 | 94 | 30 | 60 | 300 |
MK30-4TA | Rc1/2 | 100 | 30 | 60 | 300 |
Standard Specifications
fluid | gas | ||
Flow | See model list | If you require a flow rate other than the standard specification, please contact us. | |
connection | Rc female thread | Change to R male thread. Combination with R male thread is also possible. | |
Heatproof temperature | Maximum 80℃ | – | |
Pressure resistance | 1MPa | – | |
Material | Transparent tube | acrylic | – |
Fittings | C3604 (Brass) | SUS products are also available. | |
spring | SUS304 | – | |
Nylon ball | Nylon 66 | In some cases, cylindrical floats are used. | |
O-ring | Nitrile Rubber | – |