MAEDA KOKI MKCT Type Air Signal

Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKCT type

Features

It shows flow quantity by viewing because use a transparent taper pipe, with a ball (or a float) and the indication red line.
It can confirm approximate flow quantity by looking at the position concerned.
With protective cover by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter because use a spring inside, the posture when attach it looks up and look down; and it can perform sideways-facing freely.

Model
MKCT □* –□TAR

Common use flow quantity
□L/min

※Supplement about the model

The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOAR. An example: MKCT20-3TOAR
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOMAR. An example: MKCT20-3TOMAR
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOAR. An example: MKCT20-3TMOAR

Fluid		Gas
Connection		Rc internal thread	Change to R screw The combination with the R screw is possible, too.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent pipe	Acrylic	–
	Coupling	C3604 (brass)	I can produce the product made in SUS, too.
	Protective cover	BC	I can produce the product made in aluminum, too.
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	O ring	Nitrile rubber	–