MAEDA KOKI MKCT Type Oil Signal

Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKCT type

Features

It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line. It can confirm approximate flow quantity by looking at the position concerned.
With protective cover, by a metal protective cover, it reduce possibility of the damage by shocks from the outside.
The installation direction does not matter. The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

Model
MKCT □* –□TL

Kind of the oil□
(or viscosity □ cSt of the oil)

Common use flow quantity
□L/min

※Supplement about the model:

The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOL. An example: MKCT20-3TOL
The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOML. An example: MKCT20-3TOML
The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOL. An example: MKCT20-3TMOL

Fluid		Oil
Connection		Rc internal thread	Change to R screw The combination with the R screw is possible, too.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	I can produce the product made in SUS, too.
	Protective cover	BC	I can produce the product made in aluminum, too.
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	O ring	Nitrile rubber	–

Fluid		Oil
Connection		The reference mentioned above	–
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	–
	Cap nut	C3604 (brass)	–
	Zipper sleeve	Cu	–
	Protective cover	BC	I can produce the product made in aluminum, too.
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	O ring	Nitrile rubber	–