Maeda Koki
MAEDA KOKI MKCT Type Water Signal

Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKCT type
Features
- It shows flow quantity by viewing, because use a transparent taper pipe, with a ball (or a float) and the indication red line.
- It can confirm approximate flow quantity by looking at the position concerned.
- With protective cover, by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
- The installation direction does not matter because use a spring inside, the posture when attach it looks up and look down; and it can perform sideways-facing freely.
List of models
Model | Dimensions (mm) | Standard specifications flow quantity (about L/min) | |||
Connection | Full length | Overall width | Depth | ||
MKCT20-1TW | Rc1/8 | 80 | 30 | 22 | 1-5 |
MKCT20-2TW | Rc1/4 | 80 | 30 | 22 | |
MKCT20-3TW | Rc3/8 | 86 | 30 | 22 | |
MKCT30-2TW | Rc1/4 | 104 | 43 | 32 | 4-17 |
MKCT30-3TW | Rc3/8 | 104 | 43 | 32 | |
MKCT30-4TW | Rc1/2 | 110 | 43 | 32 | |
MKCT35-4TW | Rc1/2 | 145 | 50 | 44 | 8-30 |
MKCT35-6TW | Rc3/4 | 145 | 50 | 44 | |
MKCT45-6TW | Rc3/4 | 171 | 62 | 50 | 10-40 |
MKCT45-8TW | Rc1 | 171 | 62 | 50 |
- In the case of an order, an estimate □Please appoint the inside of this.
Model MKCT □* –□TW | Common use flow quantity □L/min |
- An example: MKCT20-2TW common use flow quantity 3L/min
※Supplement about the model
- The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOW. An example: MKCT20-3TOW
- The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOMW. An example: MKCT20-3TOMW
- The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOW. An example: MKCT20-3TMOW
Fluid | Water | ||
Flow quantity | The reference mentioned above | When standard specifications flow quantity or less want the above, please refer. | |
Connection | Rc internal thread | Change to R screw The combination with the R screw is possible, too. | |
Heat-resistant temperature | A maximum of 80 degrees Celsius | – | |
Withstand pressure | 1MPa | – | |
Materials | Transparent pipe | Acrylic | – |
Coupling | C3604 (brass) | I can produce the product made in SUS, too. | |
Protective cover | BC | I can produce the product made in aluminum, too. | |
Spring | SUS304 | – | |
Nylon ball | Nylon 66 | I may use a cylindrical float. | |
O ring | Nitrile rubber | – |