MAEDA KOKI MKCTV Type Water Signal

Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKCTV type

Features

It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line.
It can confirm approximate flow quantity by looking at the position concerned.
With flow quantity adjustment valve by adjusting a miniature valve, putting balls together at the position of the indication red line.
Setting of the necessary flow quantity is possible.
With protective cover, by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter.
The posture when I attach it as I use a spring inside looks up and is downward and it can perform sideways-facing freely.

Model	Dimensions (mm)				Standard specifications flow quantity (about L/min)
Model	Connection	Full length	Overall width	Depth	Standard specifications flow quantity (about L/min)
MKCTV20-1TW	RC1/8	115	30	22	1-5
MKCTV20-2TW	Rc1/4	115	30	22
MKCTV20-3TW	Rc3/8	122	30	25

Model
MKCTV □* –□TW

Common use flow quantity
□L/min

An example: MKCTV20-2TW common use flow quantity 3L/min
※The model in case of the connection R screw is MKCTV20- □It becomes TOW. An example: MKCTV20-3TOW

Fluid		Water
Flow quantity		The reference mentioned above	When standard specifications flow quantity or less want the above, please refer.
Connection		Rc internal thread	Change to R screw The combination with the R screw is possible, too.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent pipe	Acrylic	–
	Coupling	C3604 (brass)	–
	Protective cover	BC (gunmetal)	–
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.
	O ring	Nitrile rubber	–
	Miniature valve	BC	The production at the valve with the check nut is possible, too.