Maeda Koki
MAEDA KOKI MKT Type Air Signal
Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKT type
Features
- It shows flow quantity by viewing because use a transparent taper pipe, with a ball (or a float) and the indication red line.
- It can confirm approximate flow quantity by looking at the position concerned.
- The installation direction does not matter.
- The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.
List of models
Model | Dimensions (mm) | Maximum flow quantity (L/min) | ||
Connection diameter | Full length | Overall width | ||
MKT25-1TA | Rc1/8 | 78 | 25 | 200 |
MKT25-2TA | Rc1/4 | 78 | 25 | 200 |
MKT25-3TA | Rc3/8 | 84 | 25 | 200 |
MKT30-2TA | Rc1/4 | 104 | 30 | 500 |
MKT30-3TA | Rc3/8 | 104 | 30 | 500 |
MKT30-4TA | Rc1/2 | 110 | 30 | 500 |
- In the case of an order, an estimate □Please appoint the inside of this.
Model MKT □* –□TA | Common use flow quantity □L/min |
- An example: MKT25-2TA common use flow quantity 100L/min
※Supplement about the model
- The model in case of the R screw is MKT a connection entrance exit □* -□It becomes TOA. An example: MKT25-3TOA
- The model in case of the R screw is MKT a connection entrance □* -□It becomes TOMA. An example: MKT25-3TOMA
- The model in case of the R screw is MKT a connection exit □* -□It becomes TMOA. An example: MKT25-3TMOA
Standard specifications
Fluid | Gas | ||
Connection | Rc internal thread | Change to R screw The combination with the R screw is possible, too, | |
Heat-resistant temperature | A maximum of 80 degrees Celsius | – | |
Withstand pressure | 1MPa | – | |
Materials | Transparent pipe | Acrylic | – |
Coupling | C3604 (brass) | I can produce the product made in SUS, too. | |
Spring | SUS304 | – | |
Nylon ball | Nylon 66 | I may use a cylindrical float. | |
O ring | Nitrile rubber | – | |
