Japan, Maeda Koki
Maeda Koki MKTV Type Air Signal
Made in Japan
Manufacturer: Maeda Machinery Research Institute Ltd.
Model: MKTV Type
Features
- A transparent tapered tube is used, so the flow rate can be checked by looking at the relative position of the ball (or float) and the red line.
- The required flow rate can be set by adjusting the miniature valve with flow control valve and aligning the ball with the red line .
- No matter the installation direction.. A spring is used inside, so the installation
Model list
| Model | Dimensions (mm) | Maximum flow rate (L/min) | |||
|---|---|---|---|---|---|
| Connection | Full length | Overall width | Depth | ||
| MKTV25-1TA | Rc1/8 | 94 | 25 | 51 | 150 |
| MKTV25-2TA | Rc1/4 | 95 | 25 | 51 | 150 |
| MKTV25-3TA | Rc3/8 | 99.5 | 25 | 51 | 200 |
Standard Specifications
fluid | gas | ||
connection | Rc female thread | Change to R male thread. Combination with R male thread is also possible. | |
Heatproof temperature | Maximum 80℃ | – | |
Pressure resistance | 1MPa | – | |
Material | Transparent tube | acrylic | – |
Fittings | C3604 (Brass) | – | |
spring | SUS304 | – | |
Nylon ball | Nylon 66 | In some cases, cylindrical floats are used. | |
Miniature Valve | B.C. | – | |
O-ring | Nitrile Rubber | – | |
