Maeda Koki
MAEDA KOKI MKTV Type Oil Signal
Manufacturer: Maeda Machinery Research Institute Ltd.
Model : MKTV type
Features
- It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line.
- It can confirm approximate flow quantity by looking at the position concerned.
- With flow quantity adjustment valve. By adjusting a miniature valve a ball (or a float) at the position of the indication red line.
- Setting of the flow quantity that is necessary by putting it together is possible.
- The installation direction does not matter. The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.
List of models
Model | Dimensions (mm) | Maximum flow quantity (L/min) | ||||
Connection | Full length | Overall width | Depth | |||
Right? ji Include See Form | MKTV25-1TL | Rc1/8 | 94 | 25 | 51 | 3 |
MKTV25-2TL | Rc1/4 | 94 | 25 | 51 | 3 | |
MKTV25-3TL | Rc3/8 | 99 | 25 | 51 | 3 | |
Copper Pipe Business | MKTV25-4 | φ 4 | 110 | 25 | 51 | 1.5 |
MKTV25-6 | φ 6 | 112 | 25 | 51 | 3 | |
MKTV25-8 | φ 8 | 114 | 25 | 51 | 5 | |
MKTV25-10 | φ 10 | 119 | 25 | 51 | 5 |
- In the case of an order, an estimate □Please appoint the inside of this.
Model MKTV □* –□TL | Kind of the oil□ (or viscosity □ cSt of the oil) | Common use flow quantity □L/min |
- An example: Kind ISOVG32 common use flow quantity 3L/min of the MKTV25-2TL oil
- ※The model in case of the connection R screw is MKTV25- □It becomes TOL. An example: MKTV25-3TOL
Standard specifications (protest a form)
Fluid | Oil | ||
Connection (the exit side) | Rc internal thread | The change to R screw is possible, too. The connection of the valve becomes only the R screw. | |
Heat-resistant temperature | A maximum of 80 degrees Celsius | – | |
Withstand pressure | 1MPa | – | |
Materials | Transparent taper pipe | Acrylic | – |
Coupling | C3604 (brass) | – | |
Spring | SUS304 | – | |
Nylon ball | Nylon 66 | I may use a cylindrical float. | |
Miniature valve | BC | The production at the valve with the check nut is possible, too. | |
Standard specifications (for the copper pipe)
Fluid | Oil | ||
Connection (the exit side) | The reference mentioned above | – | |
Heat-resistant temperature | A maximum of 80 degrees Celsius | – | |
Withstand pressure | 1MPa | – | |
Materials | Transparent taper pipe | Acrylic | – |
Coupling | C3604 (brass) | – | |
Cap nut | C3604 (brass) | – | |
Zipper sleeve | Cu | – | |
Spring | SUS304 | – | |
Nylon ball | Nylon 66 | I may use a cylindrical float. | |
Miniature valve | BC | – | |
