Japan, Magnescale
Magnescale DF800S Series High Resolution Type
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: DF800S
Features
- High angular accuracy [±0.1 arcsec] resulting from a Magnescale algorithm with 0.0012 arcsec resolution
- High reproducibility: Non contact design enables accurate measurements that are not affected by variations in installation tolerances
- Easy installation: Only 15 minutes from installation to measurement
- Portable measurement kit: Compact and easy to carry
Specifications
| Main specification | |||
|---|---|---|---|
| The Laserscale uses a semiconductor laser. The laser beam is harmful to the human body, so please do not look into the detection head section. | |||
| Model name | SET-HD100 | ||
| Detecting radius | 41.723 mm | ||
| Maximum rotary response speed | 10 min-1 | ||
| Number of scale wavelengths | 220 (1,048,576) / revolution | ||
| Scale signal resolution | 1.236” arcsec | ||
| Accuracy | Calibration condition : ±0.1” arcsec Mounting tolerance : ±0.2” arcsec | ||
| Reference point | 1 point | ||
| Output format | USB interface | ||
| Interpolation factor | 210 (1,024) / revolution | ||
| Total number of divisions | 230 (1,073,741,824) / revolution | ||
| Signal Output resolution | 0.0012” arcsec | ||
| Number of sensors | 6 sensors / unit | ||
| Light source | Semiconductor laser × 6 Wave length790 nm, 5 mW or less / sensor | ||
| Radiation power | EN60825: class 3B, JIS: class 3B, DHHS: class IIIb | ||
| Operating temperature | +10 to +30 ℃ (no condensation) | ||
| Storage temperature | 0 to +50 ℃ (no condensation) | ||
| Power supply voltage | DC 20 to 24 V / 5 A (Max. 8 A) | ||
| Dimension/Mass | Scale unit: Φ100×H8.5 mm / 300 g or less Head unit: Φ180×H46 mm / 3.8 kg or less Interpolator unit: 298×210×110 mm / 5kg or less | ||
Related Products
-
YOSHITAKE GD-28S-NE Pressure Reducing Valve – Water
-
TONE RH40K Ratchet Handle (Socket Hold Type)
-
Nippon Chemical Screw PEEK/(-)BT(M-L) PEEK/(-)hex bolt
-
Chiyoda Seiki SKR-200H/SKR-200H-H/MR-200H/MR-200H-H/SKR-200HS/SKR-200HS-H/MR-200HS/MR-200HS-H (Primary pressure: 24.6 MPa or less / adjustment pressure 2.0 to 20.0 MPa)
-
UHT Corporation The Collets And Collet Nut For The Spindle
-
Nagasaki Jack M-800~1800 Mission jack
