Japan, Magnescale
Magnescale DK Series Robust Long Range Measurement Type
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: DK Series
Features
- Measuring range : 10 mmm, 25 mm, 50 mm, 100 mm, 155 mm, 205 mm
- Maximum Resolution : 0.5 μm
- Accuracy : 2 μm p-p to 6 μm p-p (depends on the model)
- Dustproof, dripproof, and oilproof construction. Good environmental resistance. (P type)
- High measuring force (DK10/25/50/100P type) : 4.9 N to 9.3 N (depends on the model)
- Low measuring force (DK10/25/50/100N type) : 0.3 N to 2.7 N (depends on the model)
- Measurement can be performed by adsorbing it to the moving table with the attached magnetic adsorption type feeler (DK155/205).
- Built-in reference point
- Output signal: A/B/reference point (voltage-differential line driver output)
Specifications
Specifications |
||||
---|---|---|---|---|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box. |
||||
Model | DK10NR5 | DK10PR5 | DK10PLR5 | |
Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |||
Maximum resolution*1 | 0.5 μm | |||
Measuring range | 10 mm | |||
Accuracy (at 20 °C) | 2 μm | |||
Measuring force (at 20 °C) | Upward | 0.3 ±0.25 N | 4.9 N or less | |
Horizontal | 0.6 ±0.3 N | 4.9 N or less | ||
Downward | 0.8 ±0.35 N | 4.9 N or less | ||
Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
Maximum response speed | 250 m/min | |||
Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | |||
Impact resistance | 1,500 m/s2 (11 ms) | |||
Protection grade | IP50 | IP64 | ||
Operating temperature | 0 to +50 °C | |||
Storage temperature | −20 to +60 °C | |||
Power supply | DC +5 V ±5 % | |||
Power consumption | 1 W or less | |||
Output cable length | Approx. 2.5 m | |||
Stem diameter | φ20 0‒0.013mm | |||
Mass*2 | Approx. 230 g | |||
Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | |||
Accessories | +P M4x5 screw (2 pcs.), instruction manual |
Specifications |
|||||
---|---|---|---|---|---|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box. |
|||||
Model | DK25NR5 | DK25PR5 | DK25NLR5 | DK25PLR5 | |
Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||||
Maximum resolution*1 | 0.5 μm | ||||
Measuring range | 25 mm | ||||
Accuracy (at 20 °C) | 2 μm p-p | ||||
Measuring force (at 20 °C) | Upward | 0.4 ±0.3 N | 4.9 N or less | 0.4 ±0.3 N | 4.9 N or less |
Horizontal | 0.7 ±0.35 N | 4.9 N or less | 0.7 ±0.35 N | 4.9 N or less | |
Downward | 1 ±0.4 N | 4.9 N or less | 1 ±0.4 N | 4.9 N or less | |
Reference point | at 1 mm ±0.5 mm position of spindle movement | ||||
Maximum response speed | 250 m/min | ||||
Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||||
Impact resistance | 1,500 m/s2 (11 ms) | ||||
Protection grade | IP50 | IP64 | IP50 | IP64 | |
Operating temperature | 0 to +50 °C | ||||
Storage temperature | −20 to +60 °C | ||||
Power supply | DC +5 V ±5 % | ||||
Power consumption | 1 W or less | ||||
Output cable length | Approx. 2.5 m | ||||
Stem diameter | φ20 0‒0.013mm | ||||
Mass*2 | Approx. 300 g | ||||
Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | ||||
Accessories | +P M4x5 screw (2 pcs.), instruction manual |
Specifications |
|||
---|---|---|---|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box. |
|||
Model | DK50NR5 | DK50PR5 | |
Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||
Maximum resolution*1 | 0.5 μm | ||
Measuring range | 50 mm | ||
Accuracy (at 20 °C) | 2 μm p-p | ||
Measuring force (at 20 °C) | Upward | – | 6.2 N or less |
Horizontal | 0.9 ±0.4 N | 6.2 N or less | |
Downward | 1.3 ±0.5 N | 6.2 N or less | |
Reference point | at 1 mm ±0.5 mm position of spindle movement | ||
Maximum response speed | 250 m/min | ||
Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||
Impact resistance | 1,500 m/s2 (11 ms) | ||
Protection grade | IP50 | IP64 | |
Operating temperature | 0 to +50 °C | ||
Storage temperature | −20 to +60 °C | ||
Power supply | DC +5 V ±5 % | ||
Power consumption | 1 W or less | ||
Output cable length | Approx. 2.5 m | ||
Stem diameter | φ20 0‒0.013mm | ||
Mass*2 | Approx. 360 g | ||
Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | ||
Accessories | +P M4x5 screw (2 pcs.), instruction manual |
Specifications |
|||
---|---|---|---|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual.
*2 The mass indicated is the total mass excluding the cable and interpolation box. |
|||
Model | DK100NR5 | DK100PR5 | |
Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||
Maximum resolution*1 | 0.5 μm | ||
Measuring range | 100 mm | ||
Accuracy (at 20 °C) | 4 μm | ||
Measuring force (at 20 °C) | Upward | – | 9.3 N or less |
Horizontal | 1.8 ±0.65 N | 9.3 N or less | |
Downward | 2.7 ±0.55 N | 9.3 N or less | |
Reference point | at 1 mm ±0.5 mm position of spindle movement | ||
Maximum response speed | 250 m/min | ||
Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||
Impact resistance | 1,500 m/s2 (11 ms) | ||
Protection grade | IP50 | IP64 | |
Operating temperature | 0 to +50 °C | ||
Storage temperature | −20 to +60 °C | ||
Power supply | DC +5 V ±5 % | ||
Power consumption | 1 W or less | ||
Output cable length | Approx. 2.5 m | ||
Stem diameter | φ20 0‒0.013mm | ||
Mass*2 | Approx. 630 g | ||
Feeler | DZ-121 : carbide ball tip, mounting screw M2.5 | ||
Accessories | +P M4x5 screw (2 pcs.), instruction manual |
Specifications |
||
---|---|---|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. *2 The mass indicated is the total mass excluding the cable and interpolation box. *3 The spindle mass about 400 g. |
||
Model | DK155PR5 | DK205PR5 |
Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |
Maximum resolution*1 | 0.5 μm | |
Measuring range | 155 mm | 205 mm |
Accuracy (at 20 °C) | 5 μm p-p | 6 μm p-p |
Reference point | at 5 mm ±0.5 mm position of spindle movement | |
Maximum response speed | 250 m/min | |
Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | |
Impact resistance | 1,500 m/s2 (11 ms) | |
Protection grade | IP64 | |
Operating temperature | 0 to +50 °C | |
Storage temperature | -20 to +60 °C | |
Power supply | DC +5 V ±5 % | |
Power consumption | 1 W or less | |
Cable length | Approx. 2.5 m | |
Stem diameter | φ32 (0 to 0.05) mm | |
Mass*2 | Approx. 1,100 g | Approx. 1,300 g |
Surface to be measured | Soft magnetic material | |
Magnetically attachable feeler | Magnetic attraction : 10 N, resistance against horizontal slip : 2.7 N Provided with φ4 mm carbide ball tip | |
Spindle*3 | Spindle φ8 mm, radial swing : max.0.04 mm | |
Output cable length (up to the electronic section) |
22 m max. | |
Accessories | +P M4x5 screw (2 pcs.), instruction manual |
Related Products
-
Ebara AGE Semi-Vaccum Pump
-
Daitoukeiki B13D type guage B Micromanometers
-
Furuto Industrial (Monf) No.8015 Cloth Adhesive Tape
-
Chiyoda Seiki AHN/GHN-series Pressure Regulator With Outlet Valve (High Select/Excellent series) (with outlet valve, 1-stage decompression type pressure regulator)
-
Kanetec PCMR POWERFUL PULLEY TYPE LOCUS SEPARATOR
-
Fujii Denko Pole Platform (Single Footrest Type)