Magnescale MG50/51/MF10 Interface

Manufacturer: Magnescale Co., Ltd.
Model: MG50/51/MF10

Features

  • MG50-EC (EtherCAT) / MG50-CL (CC-Link)
    • Fieldbus compatible main module interface unit. Maximum of 30 gauges can be connected to MG50-EC (maximum of 16 gauges for MG50-CL).
  • MG51
    • Distribution module for MG50. When installing digital gauges over a long distance, extension cables aren’t required when using a MG51. Ten gauges can be connected per unit. Maximum cable length is 30 m.
  • MF10-CM
      • Counter module for DF800S series. MF10-CM is compatible with the MG50/51 series.

    MG50/51/MF10

  • MF10-P1 / P2
    • Digital tolerance indicator for DF800S series digital gauges. 2 clicks to set the threshold value.
      MF10-P1 : NPN output (current sink)
      MF10-P2 : PNP output (current source)
  • Specifications

    MG50 series Specifications

    ModelMain moduleDistribution module
    MG50-ECMG50-CLMG51
    Commnication protocolEtherCATCC-LinkData transferred to main module by dedicated protocol
    Baud rate100 MbpsMaximum downlink speed of 10 Mbps
    Node address setting methodSet with decimal rotary switches or softwareSet with decimal rotary switches
    Node address range000 to 192Max. 64
    Maximum connectable counter modules301610
    Maximum connectable distribution modules8
    Maximum cable lengthMaximum cable length between main module and distribution module: 30 m
    Mounting method35 mm DIN rail mounting
    Power supplyDC 24 V (20.4 to 26.4 V)
    Power consumption / Current consumption (main unit only)2.4 W or less    100 mA or less (at DC 24 V)2 W or less    80 mA or less (at DC 24 V)

     

    MF10 series Specifications

    ModelDigital tolerance indicatorCounter module
    MF10-P1MF10-P2MF10-CM
    FunctionNPN output (current sink)PNP output (current source)Counter module for MG50
    I/ONumber of Go/No Go judgement output 2, Number of external inputs 1
    Load voltage: DC 30 V or less, open collector output type
    Load current: the total of the two outputs must be 100 mA or less
    Residual voltage and load current less than 10 mA: 1 V or less
    Load current 10 mA to 100 mA: 2 V or less
    Off-state current: 0.1 mA or less
    Minimum display unit0.1 µm
    Cable lengthinput/output, power cable 2 m
    Mounting method35 mm DIN rail mounting
    Power supply+10 to +30 V DC including ripple (p-p) 10 %
    Power consumption / Current consumption2.1 W or less / 85 mA or less

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top