Japan, Magnescale
Magnescale MG80-NE/EI/PN/EC MG80-CM Interface
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: MG80-NE/EI/PN/EC MG80-CM
Features
MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT)
- Fieldbus-compatible interface unit.
- You can link each MG80-xx and MG80-CM system via an Ethernet cable to expand the number of gauges that can be connected. For more detailed specifications, please refer to the system documentation.
MG80-CM
- Counter module for DK800S, DK and DT series (via MT13) digital gauges.
- DIN rail mount for easy installation
LZ80-K1/K2
- I/O module for MG80-EI, MG80-PN and MG80-EC.
- Equipped with 8 inputs and 8 outputs
Specifications
Main module |
||||
---|---|---|---|---|
Model name | MG80-NE | MG80-EI | 80-PN | MG80-EC |
Commnication protocol | Ethernet (TCP/TP) 100BASE-TX |
EtherNet/IP | PROFINET | EtherCAT |
Function | Resolution selection (0.1 to 10 µm), reference point setting, reset, preset, master preset, current value / maximum value / minimum value / P-P value output of each axis, calculation function (2-axis addition and subtraction), comparator function (Up to 8 sets of 2 or 4 steps can be set) | |||
Transmission speed | 100 Mbit/s | |||
Maximum connectable counter modules | MG80-CM units can be connected to each MG80-NE. Up to 64 gauges can be connected (via link connection) | 16 MG80-CM units can be connected to each MG80-EI/PN. Up to 255 gauges can be connected (via link connection and fieldbus IP address configuration) | 16 MG80-CM units can be connected to each MG80-EC. Up to 65,535 gauges can be connected (via link connection) | |
Mounting method | 35 mm DIN rail mounting | |||
Power supply voltage | DC 10.8 to 26.4 V | |||
Power supply voltage | 2.4 W or less | |||
Maximum cable length* | 20 m (shielded CAT5e recommended) | |||
*The customer must provide the communication cables. |
Counter module |
||
---|---|---|
Model | MG80-CM | |
Power consumption | 2.0 W or less (Measuring unit excluded) | |
Compatible measuring units | DK800S series, DK series, DT series (via MT13) | |
Alarm | Frequency response exceeded, Measuring unit not connected, Cable breakage |
I/O module* |
||
---|---|---|
Model | LZ80-K1/LZ80-K2 | |
Power consumption | 2.0 W or less | |
I/O | 9-pole connector × 2 Photo coupler insulated 8 input, 8 output LZ80-K1: Current Sink LZ80-K2: Current Source |
Related Products
-
TSURUMI PUMP PARTS: STRAINER FOR 3PN 4PN 8PN Parts & Accessories
-
Super Tool CS0A/1A/3A, 0B/1B/3B Snap Ring Plier Standard Claw Type
-
Honda Kiko HRG Roto-jet pumps
-
SAKUSAKU 4SS-20D 2.5S Carbide Square End Mill 4-Flute
-
NAGANO KEIKI SD__ Diaphragm Seal Pressure Gauge
-
Shinano SI-2107A Angle Head Mini Sander Standard Air Tools