Japan, MAXPULL
Maxpull Industrial large manual winch
Made in Japan
Manufacturer: Maxpull
Model: GM-50 type/GM-100 type
Features
A large manual winch for industrial use that is unparalleled in the world. Two models with a tensile force of 5 tons and 10 tons are available. For ships, for large equipment, for plant maintenance, for raising and lowering water gates, and for emergency power during power outages and disasters.
Specifications
| model | GM-50 type | GM-100 type |
| wire rope tensile force | 49000N (5000kgf) φ16 wire rope 3rd layer standard | 98000N (10000kgf) φ20 wire rope 3rd layer standard |
| Wire rope capacity | φ16×52m (4 layers winding) | φ20×55m (3 layers winding) |
| length of winding per rotation | 6.3mm | 3.4mm |
| Deceleration ratio | 1/145 | 1/320 |
| Handle operating force | 1st layer: 119N(12.1kgf) 3rd layer: 160N(16.3kgf) | 1st layer: 141N(14.3kgf) 3rd layer: 188N(19.1kgf) |
| Handle length (effective maximum) | 370mm | 370mm |
| Weight (Body + Handle) | about 400 kg | about 750kg |
Related Products
-
Super Tool PSH440-650 Sub Table For MC (Screw Hole Type) (M16)
-
Kyowa 30° Ferrule
-
Chiyoda Seiki RF-400P Medium Flow Rate, Self-powered Pressure Regulator/Large Flow Rate, Pilot Type Pressure Regulator (Primary pressure: 0.2 MPa or less/adjustment pressure 0.003 to 0.02 MPa, standard flow rate: 150 m3/h・Air)
-
Tajima M-TCLP Tape Clip
-
H.H.H Aluminum Clamp Tube
-
Fujii Denko FS-51L Snap Hook
