Products Made in Japan
Manufacturer :Mirai Kogyo
Model :BUT-SP3

A high-sensitivity, rechargeable, three-point impression type has been added to the high-performance magnetic detector ‘Magnet Atter’.

Set contents

• Main unit × 1
• Storage cap for stamp × 1
• Nickel-metal hydride batteries (AAA) × 2
• Refill ink for stamp × 1
• USB cable × 1 * (Equipped with a temperature sensor that stops current in case of abnormal heating)
• Instruction manual × 1

Features

• Detects magnets in slide boxes accurately using a clear matrix LED lamp and buzzer, allowing you to mark drilling points at that location. *Three-point marking makes it usable with both oblong hole saws and SB hole saws.
• Comes with a spirit level, convenient for making cuts in boxes and installing devices.
• The nickel-metal hydride battery can be charged via a USB cable. *Use with alkaline batteries is also possible (features dry battery mischarge prevention).
• Battery saving feature. The auto power-off function automatically turns off the power after about 3 minutes.
• No need for complicated sensitivity adjustments thanks to a unique method.
• Compact size that fits in a breast pocket.

• Detection Box: Magnet (N pole) ※Magnet position: Center of the box.Please use this for boxes where the magnet is positioned at the center of the box, such as an EG slide box, etc. If used on boxes where the magnet is not positioned at the center, the marking position and the center of the hole saw opening will not align.
  • Oblong slide box
  • Slide box with an added retrofit magnet ※ Such as Point Atter or a fold-off magnet from an oblong slide box ※ Super Point Atter (NBS-60, NBS-3B60, NBS-3C60) is not applicable.
• Detection Range: 9-40 mm (NBS-6 is 9-30 mm)
• Detection Error: Within 5 mm from the center of the magnet ※ Please be aware that detection beyond the suitable range of 40 mm will exceed the error range.
• Power Source: AAA nickel-metal hydride rechargeable battery or AAA alkaline battery (non-rechargeable) ※ Lithium and manganese batteries cannot be used.
• Charging Time: About 3 hours
• Auto Power-Off Feature: About 3 minutes
• Operating Temperature: 5°C to 40°C
• Storage Temperature: -10°C to 40°C ※ If the storage location is cold, please warm it up before use. There may be false detections or sensitivity issues.

Specifications

※1: The magnet must be positioned at the center of the box.
※2: Super Pointer Atter (NBS-60, NBS-3B60, NBS-3C60) is not applicable.\

Magnet Atter (high sensitivity, rechargeable, three-point impression type) accessories