Japan, Mirai Kogyo
Mirai Kogyo FDH-UC Chip cup (for back side)
Products Made in Japan
Manufacturer :Mirai Kogyo
Model :FDH-UC
A holder called ‘Chip Cup (for backside)’ designed to prevent and collect metal filings during metal panel drilling.
Features
- Prevents and collects metal filings during metal panel drilling with a drill.
- Equipped with a magnet for temporary fixing, making positioning easy.
- Foldable and compact.
- The silicone rubber holder is removable and washable.
Preparation before use
- Turn the cap in the direction to unlock it and remove it.
- Push out the bottom of the holder from the inside, or pull it from the outside to expand it.
- Remove the cap from the chip cup and stretch the rubber part.
- Draw the center line for drilling on both the inside and outside of the metal panel, and align the line of the chip cup with this mark for temporary fixing.
- Fix the ears of the top cover in place using protective tape or similar. *Although temporary fixing with magnets is possible, there is a risk of shifting or falling due to vibrations during drilling, so please make sure to fix it in two diagonal places with protective tape or similar.
- After drilling, remove the chip cup
Specifications
Part number | Conformity | Quantity |
FDH-UC | Up to φ35 | 1 |
Related Products
-
LPL DL-4L Digital Data Light
-
Watanabe WPM-1-11 Digital panel meter for DC voltage/current (single display, 48 x 96) – DC meter
-
Chino IR-TA Series Handheld Type Radiation Thermometers
-
KONAN SAF100-5 Explosion-proof Insulation Barrier (Safety Barrier)
-
Vessel No.NMS-2PR(Red) Magnet Catcher Short
-
Oasaka Taiyu CA-V Drum Transporter Robotter