Miyawaki TB7BN-C Temperature Control Steam Trap

Manufacturer: MIYAWAKI Inc.
Model: TB7BN-C

Features

Complete steam containment
The temperature control trap operates with an adjustable subcooling of condensate. Thus maintaining a certain condensate level in the trap. This mechanism provides a 100% tight sealing and effectively prevents steam loss during operation.

Superb durability
The MIYAWAKI SCCV (Self Closing and Centering Valve) System has the effect of increasing durability by achieving soft closing during operation.
Consisting of a free rotating valve that is centered and guided by the condensate flow, hence perfectly fitted in the valve seat even under extreme conditions of high pressure applications. This significantly reduces wear and erosion of the valve components.

Energy saving effect
A significant energy saving effect is achieved by controlling the temperature of discharged condensate. Especially in application where sensible heat of condensate can be used for heating purpose, this trap reduces steam consumption significantly.

Blowdown valve
A blowdown valve to eliminate dirt from pipes and scale that has entered and built up in the trap without having to disassemble the trap.
●TB7BN-C up to 0,98MPa (142psig)

Typical applications

Suitable for steam main lines, trace lines, and other such applications.

Dimensions/Weight

Screwed / Socket Weld

Size	Dimensions (mm)				Dimensions (in)				Weight
	L	H1	H2	W	L	H1	H2	W	(kg)	(lb)
1/2”	70	82	60	56	2.8	3.2	2.4	2.2	0,9	2.0
3/4”	80				3.2				1,0	2.2
1”									1,1	2.4

Flanged

JIS,ASME

Size	Dimensions (mm)				Dimensions (in)				Weight (kg)					Weight (lb)
	L	H1	H2	W	L	H1	H2	W	JIS(FF,RF)		JIS(RF)	ASME/JPI(RF)		JIS(FF,RF)		JIS(RF)	ASME/JPI(RF)
									10K,16K	20K	30K	150lb	300lb	10K,16K	20K	30K	150lb	300lb
1/2”	145	82	60	56	5.7	3.2	2.4	2.2	2,4	2,5	2,6	2,0	2,5	5.3	5.5	5.7	4.4	5.5
3/4”									2,8	2,9	3,0	2,5	3,4	6.2	6.4	6.6	5.5	7.5
1”									3,9	4,1	4,2	3,2	4,2	8.6	9.0	9.2	7.0	9.2

DIN PN40

Size	Dimensions (mm)				Dimensions (in)				Weight
	L	H1	H2	W	L	H1	H2	W	(kg)	(lb)
DN15	150	82	60	56	5.9	3.2	2.4	2.2	2.7	5.9
DN20									3.5	7.7
DN25	160				6.3				4.1	9.0

*Customized face-to-face dimensions on request.
*Please contact MIYAWAKI for further information.

Specifications

Model

Connection

Max. operating pressure

Max. operating differential pressure

Max. operating temperature

Adjustable range

Standard set temperature

Body material

Type

Size

PMO (MPa)

PMO (psig)

(MPa)

(psig)

TMO (℃)

TMO (℉)

(℃)

(℉)

(℃)

(℉)

TB7BN-C

Screwed

Rc,NPT

1/2”

0.98

142

0.98

142

183

361

50 – 160

122 – 320

100
(at 1,0MPa)

212
(at 145psig)

Forged steel

A105

3/4”

1”

TB7BNF-C

Flanged

FF,RF

1/2”

3/4”

1”

TB7BNW

Socket Weld

1/2”

3/4”

1”

Maximum allowable pressure (PMA): 0,98MPa (142psig)　 PMA is the pressure that can be tolerated by pressure-resistant parts (body).
Maximum allowable temperature (TMA): 183℃ (361℉)　 TMA is the temperature that can be tolerated by pressure-resistant parts (body).
Minimum operating differential pressure (⊿PMN): 0,01MPa (1.5psig)　⊿PMN is the minimum operating differential pressure between the trap inlet and outlet.

*It is possible to change the standard factory set temperature. Please specify the operating pressure and set temperature.
*Please refer to the installation manual how to adjust the set temperature.

Discharge Capacity

⊿t is the difference between the temperature of a temperature control trap when the valve is initially opened and condensate temperature. The temperature difference (⊿t) upon the initial passage of air is great, and indicates that the flow rate will also increase.

* Curve1 shows the trap’s maximum capacity when discharaging cold condensate.

**Curve2 shows the trap’s maximum capacity when discharaging hot condensate at a temperature of 10°C (18°F) below the adjusted temperature of the trap.