Japan, Musashino
Musashino Circular Gear Pump (MS Type)
Products Made In Japan
Manufacturer: Musashino
Model: MS Series
MS direction structure cross sectional view
- It has been made small and lightweight. Compared to conventional products, it has reduced weight by 30% and succeeded in miniaturization.
- By using special flat bearings, we can handle from low viscosity to high viscosity.
- It’s now very easy to disassemble. Anyone can disassemble and assemble in minutes.
- It is now easier to change the direction of rotation. No machining is required just by turning the case 180 degrees.
- Suction and discharge flanges comply with JIS standards.
- Model MS-25, MS-30 is a pilot-operated safety valve.
Rotation Speed
Model | Rotation Speed | |||||
750min-1 | 900min-1 | 1000min-1 | 1200min-1 | 1500min-1 | 1800min-1 | |
MS-2 | 13 | 16 | 18 | 21 | 26 | 33 |
MS-2.5 | 16 | 20 | 23 | 26 | 33 | 41 |
MS-3 | 20 | 25 | 26 | 33 | 41 | 50 |
MS-4 | 26 | 33 | 36 | 43 | 55 | 66 |
MS-5 | 33 | 41 | 45 | 55 | 68 | 83 |
MS-6 | 41 | 50 | 55 | 66 | 83 | 100 |
MS-8 | 55 | 66 | 73 | 88 | 110 | 133 |
MS-10 | 68 | 83 | 91 | 110 | 138 | 166 |
MS-12 | 83 | 100 | 110 | 133 | 166 | 200 |
MS-15 | 103 | 125 | 138 | 166 | 208 | 250 |
MS-20 | 138 | 166 | 185 | 221 | 276 | 333 |
MS-25 | 138 | 166 | 185 | 221 | 276 | 333 |
MS-30 | 208 | 250 | 276 | 333 | 416 | 500 |
Specification & Dimension
Model | Outer diameter BORE |
Suction and discharge flange | |||||||||||
SXD | f | e | 1 | d | n | A | B | C | L | D | H | R | |
2,2.5,3 | 25 X 25 | 125 | 90 | 18 | M16 | 4 | 68 | 165 | 110 | 92 | 180 | 275 | 125 |
4,5 | 40 X 40 | 140 | 105 | 20 | M16 | 4 | 71 | 167 | 120 | 98 | 180 | 287 | 130 |
6,8,10 | 50 X 50 | 155 | 120 | 20 | M16 | 4 | 89 | 190 | 140 | 114 | 220 | 330 | 155 |
12,15,20 | 65 X 65 | 175 | 1450 | 22 | M16 | 4 | 111 | 286 | 150 | 122 | 240 | 436 | 177 |
25,30 | 80 X 80 | 185 | 150 | 22 | M16 | 8 | 119 | 231 | 170 | 137 | 280 | 401 | 192 |
Pump mounting part | Shaft part | Pump Weight (Kg) |
|||||||||||
E | F | M | N | K | G | Z | Fn | S | S’ | W | O | P | |
60 | 100 | 100 | 130 | 40 | 13 | M10 | 4 | 16 | 13 | 5 | 45 | 40 | 16 |
60 | 100 | 100 | 130 | 40 | 13 | M10 | 4 | 18 | 15 | 5 | 45 | 40 | 19 |
90 | 130 | 120 | 160 | 45 | 15 | M12 | 4 | 24 | 20 | 7 | 50 | 45 | 30 |
100 | 140 | 140 | 180 | 50 | 15 | M12 | 4 | 26 | 22 | 7 | 50 | 45 | 43 |
120 | 170 | 180 | 220 | 50 | 15 | M12 | 4 | 30 | 26 | 7 | 56 | 50 | 52 |
- Kouei is Distributor/Agent of Musashino.
- Other items of Musashino
- Request the quotation for Musashino.
Related Products
-
SAKUSAKU CNMG120404-UG Turning Insert (80° Rhombic Negative)
-
UHT Corporation New soft lap φ30 #320
-
Kansai Kogu 1300008180,1300108180,1300209180 Flat Vent Air Hammer Chisel
-
UHT CORPORATION GU-1 No.5set Cylinder polishing unit
-
PAT.P 75 Square Clamp Orthogonal
-
TEIKOKU Prestressed Concrete Sleepers-Rail Fastenings