Nikki Co., Ltd.
Nikki Brass Elbow

Manufacturer: Nikki Co., Ltd.
What is a brass elbow?
A fitting is a type of joint that is mainly used as a part to connect two parts.
Brass fittings are suitable for low pressure piping applications or pipe connections in fuel, water, oil and gas, refrigeration and hydraulic systems.
Elbow fittings are used to change the direction of a pipe by 90 degrees, etc. You can choose an elbow joint of any angle depending on the piping layout and space constraints.
Specification
Material | Brass |
---|---|
Maximum Operating Pressure | 1 MPa |
Applicable Fluid | Water, air, oil |
Standard Model List
Street Elbow
Model | T1 | T2 | L1 (mm) | L2 (mm) | HEX (mm) | ID (mm) |
---|---|---|---|---|---|---|
N-A06-L101 | 1/8″ | 1/8″ | 15 | 20 | 14 | 5.5 |
N-A06-L201 | 1/4″ | 1/8″ | 14.5 | twenty two | 17 | 5.5 |
N-A06-L202 | 1/4″ | 1/4″ | 14.5 | 24.8 | 17 | 8 |
N-A06-S203 | 1/4″ | 3/8″ | 15.5 | 27.7 | twenty one | 10.5 |
N-A06-S302 | 3/8″ | 1/4″ | 15.5 | 26.5 | twenty one | 8 |
N-A06-S303 | 3/8″ | 3/8″ | 15.5 | 27.7 | twenty one | 10.5 |
N-A06-S304 | 3/8″ | 1/2″ | 18.5 | 33.1 | twenty four | 13 |
N-A06-S404 | 1/2″ | 1/2″ | 18.5 | 33.1 | twenty four | 13 |
Male Thread Elbow
Model | T1 | T2 | L1 (mm) | L2 (mm) | SW (mm) | ID (mm) |
---|---|---|---|---|---|---|
N-A02-L101 | 1/8″ | 1/8″ | 18 | 18.5 | 9.5 | 5.5 |
N-A02-L202 | 1/4″ | 1/4″ | 23.5 | 23.5 | 13 | 8 |
N-A02-L303 | 3/8″ | 3/8″ | 26.5 | 26.5 | 13 | 9 |
N-A02-L404 | 1/2″ | 1/2″ | 31.2 | 31.2 | 17 | 13 |
Female Thread Elbow
Model | T | L (mm) | SW (mm) |
---|---|---|---|
N-A07-L101 | 1/8″ | 14.5 | 14 |
N-A07-L202 | 1/4″ | 17.5 | 17 |
N-A07-L303 | 3/8″ | 18.5 | twenty one |
N-A07-L404 | 1/2″ | 24.5 | twenty four |