Nikki NLFL-HL Series Hanging LED floodlight

Manufacturer: Nikki Co., Ltd.
Model: NLFL-HL Series

Features

The hanging LED floodlight has a light distribution angle of 120°, achieving a natural spread of light.
Lightning strikes and electrical discharges can severely damage electronic devices, including LEDs. However, the NLFL-HL series stands out as a safe and reliable LED floodlight. Thanks to its uniquely designed protection circuit, it can effectively withstand inrush currents, voltage surges, and even momentary power outages. Moreover, it features high insulation properties, ensuring long-term durability and stability.
The LEDs, sourced from a globally trusted manufacturer, guarantee consistent performance. Additionally, the body is constructed from robust die-cast aluminum, while the front panel is made of heat-treated, shatter-resistant glass—offering both strength and reliability in harsh environments.
*When installing, be sure to attach the fall prevention wire.

Application Examples

Factory lighting, indoor lighting, warehouse lighting, gas station lighting, etc.

Specification

Color Temperature	5,700K
Main unit	Aluminum die casting
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃ to 40℃ (but do not freeze)
Protection rating	IP65
power supply	AC100-240V
power cable	3m (VCTF0.75mm2 ^x3C )

accessories	Fall prevention wire

Thorough lightning protection

The current-isolating design quickly diverts induced lightning surges, protecting products from lightning strikes. (It can discharge up to 10kA with a surge waveform of 8/20μs.)
When lightning strikes or lightning discharges occur, induced lightning surges occur in power lines, destroying many electronic devices. This product has a built-in lightning surge protection element.
±6kV between lines, ±15kV to earth
3 times the international standard, 3.75 times the international standard

SPD (Lightning Protection Device)

This LED floodlight is protected by limiting sudden, violent current fluctuations (surges) caused by lightning and other events.
A typical lightning strike generates a surge of several tens of kV or more, but this LED floodlight has an SPD installed between the power supply IC and ground, so that even if a lightning surge enters the building during a lightning surge, it is discharged from the SPD to ground.
*When installing, be sure to ground the product.

Standard Model List

Model	Total luminous flux	Illuminance (1m)	Lightning surge protection	Input voltage	Power Consumption
NLFL50-HL-AC	5,400lm	1,900lx	15kV	AC100-240V	50W
NLFL80-HL-AC	8,900lm	3,300lx			80W
NLFL100-HL-AC	11,200lm	4,100lx			100W
NLFL150-HL-AC	15,600lm	5,600lx			150W
NLFL200-HL-AC	19,700lm	6,970 lx			200W