Japan, Nippon Chemical Screw
Nippon Chemical Screw PC+PP/HR-P(D-L) PC+PP hit rivet
Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PC+PP/HR-P(D-L)
Polypropylene PC+PP hit rivet.
| Continuous use temperature | 65°C/149°F |
| Combustion quality | UL94HB |
| D | 4 | |
| A×B | 8×2 | |
| L(mm) | 6 | 1000 |
These are resin rivets for attaching panels, etc. By pushing in with your fingertips, the legs are spread apart and the panel etc. is fixed. It can also be removed using a screwdriver.
PC+PP/HR-P is plastic rivet for the panel mounting. Stretch out feet part by hammer a nail into panel. It is possible to take out by driver.
Sales unit Quantity
Torsional rupture torque
| ─ |
Tensile rupture force
| ─ |
- We use raw materials that are RoHS2 compliant.
- There may be black spots (sludge) on the exterior.
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
- The remaining gate at the screw tip is less than 5% of the length (L).
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
