Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK GF30/FH(M-L)
Polyetheretherketone GF30 (+) flathead machine screw.| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M2 | M3 | M4 |
| pitch | 0.4 | 0.5 | 0.7 |
| D | 4 | 6 | 8 |
| L(mm) | 4 | 100 | ─ | ─ |
| 5 | 100 | 100 | ─ |
| 6 | 100 | 100 | 100 |
| 8 | 100 | 100 | 100 |
| 10 | 100 | 100 | 100 |
| 12 | ─ | 100 | 100 |
| 15 | ─ | 100 | 100 |
| 16 | ─ | 100 | 100 |
| 20 | ─ | 100 | 100 |
| 25 | ─ | 100 | 100 |
| 30 | ─ | ─ | 100 |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M2 | M3 | M4 |
| N m | 0.09 | 0.27 | 0.64 |
Tensile rupture force
| Unit/Unit | M2 | M3 | M4 |
| N | 262 | 532 | 909 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
