Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK GF30/W(d-D-t)
Polyetheretherketone GF30 washer.
Continuous use temperature |
260°C/500°F |
Combustion quality |
UL94V-0 |
Nominal diameter |
4 |
5 |
d×D |
4.3×9 |
5.3×10 |
t |
0.8 |
1 |
─ |
─ |
100 |
100 |
Sales unit Quantity
Torsional rupture torque
Tensile rupture force
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.