Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/TY(L), PEEK/MTY(L) PEEK/Cable ties
Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PEEK/TY(L), PEEK/MTY(L)
Polyetheretherketone cable ties.
Continuous use temperature | 260°C/500°F |
Combustion quality | UL94V-0 |
Part number | PEEK/TY | PEEK/MTY | |
A(Width)/B | 3.5/6.5 | 3.4/5.6 | |
C/D | 4.4/6 | 4.5/8 | |
t/d | 1.2/- | 1.2/7 | |
L(mm) | 145 | 145 | |
─ | ─ | 10/100 |
Made-to-order products
|
Sales unit Quantity
Torsional rupture torque
─ |
Tensile rupture force
─ |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.