Japan, Nippon Chemical Screw
Nippon Chemical Screw PP/BT(M-L) PP/hex bolt
Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PP/BT(M-L)
polypropylene hex bolt.
| Continuous use temperature | 65°C/149°F |
| Combustion quality | UL94HB |
| M | M4 | M5 | M6 | M8 | M10 | M12 | |
| pitch | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 | |
| B×H | 7×2.8 | 8×3.5 | 10×4 | 13×5.5 | 17×7 | 19×8 | |
| L(mm) | 10 | 100 | 100 | 100 | 100 | ─ | ─ |
| 12 | 100 | 100 | 100 | 100 | ─ | ─ | |
| 15 | 100 | 100 | 100 | 100 | ─ | ─ | |
| 20 | 100 | 100 | 100 | 100 | 100 | 50 | |
| 25 | 100 | 100 | 100 | 100 | 100 | 50 | |
| 30 | ─ | 100 | 100 | 100 | 50 | 50 | |
| 35 | ─ | ─ | ─ | ─ | 50 | 50 | |
| 40 | ─ | ─ | ─ | 100 | 50 | 50 | |
| 50 | ─ | ─ | ─ | ─ | 50 | ─ | |
| 70 | ─ | ─ | ─ | ─ | ─ | 25 | |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M1.7 | M2 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| N m | – | – | – | – | 0.22 | 0.39 | 0.69 | 1.58 | 3.32 | 5.36 | – |
Tensile rupture force
| Unit/Unit | M1.7 | M2 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| N | – | – | – | – | 276 | 437 | 634 | 1143 | 1705 | 2497 | – |
- We use raw materials that are RoHS2 compliant.
- There may be black spots (sludge) on the exterior.
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
- The remaining gate at the screw tip is less than 5% of the length (L).
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
-
Chiyoda Seiki GS-1000 Series Large Flow Self-powered Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 1050 m3/h・Air)
-
Kakuta No.03S Hold Down Clamp
-
Vessel No.ACD “Cushion” Drill Bit (for concrete) Long Type
-
Eagle Jack (Konno Corporation) NZ-VC Residual Pressure Release Tool
-
SAKUSAKU TNMG160412-UG Turning Insert 60° Triangular/Negative
-
TONE AID2100 Air Impact Driver Butterfly Type
REQUEST QUOTATION
PAYMENT
LINK
