Cutting, Japan, Nissan Tanaka
NISSAN TANAKA LMZ V Bevel Laser Cutting Machine
Manufacturer: Nissan Tanaka
Model: LMZ V
Features
- Saved the installation area! (Increased an effective cutting area)
Decrease the installation area by making the machine body to compact. Increase the effective cutting area by equipped with the renewed slim bevel torch block on the compact machine body. It is possible the effectively utilize of the installation space. - Reduced the total processing time
Redesigned the bevel position control (Angle, rotation), realized the bevel smooth movement without a loss. Also to reduce 30% of the time required until to piercing start of the bevel cutting by carrying out fast lifting speed of the bevel torch. Allow to significantly reducing the total working time. - Energy saving design
Adopt of the power regeneration system of returning the energy of deceleration motor to the power, or it is possible to reduce 10~15% power consumption compared with our ratio by the power reduction of the oscillator by the standby function. Further, reduces the running cost by reduce maintenance parts. - Cutting quality of TANAKA original
Laser cutting machine is equipped with a standard functions to control the burning (G.O.S function) at the time of cutting, or to reduce of melting scratch (witness mark reduction) which generated at the end portion of cutting. Also, shorten the piercing time, and reducing the burning of after piercing by the ultra high speed piercing function, and realized the cutting plate thickness of 32mm with the bevel torch of as is.
Equipment configuration
| Cutting machine body | 1 set |
|---|---|
| CO2 laser oscillator (TF4000/TF6000) | 1 set |
| NC device (FANUC SERIES 30iLB PANELİ) | 1 set |
| Cutting head | 1 set |
| Main operation panel | 1 set |
| Cooling water circulator | 1 set |
Machine Specification
| Model | 25 | 30 | 35 | 40 | 45 | 50 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Effective cutting width (mm) | 2,600 | 3,100 | 3,600 | 4,100 | 4,600 | 5,100 | ||||||
| Rail span (mm) | 4,000 | 4,300 | 4,500 | 4,800 | 5,000 | 5,300 | 5,500 | 5,800 | 6,000 | 6,500 | 6,500 | 7,000 |
| Total length of the machine (mm) | 5,200 | 5,700 | 6,200 | 6,700 | 7,200 | 7,500 | ||||||
| Effective cutting length | Depend on customer’s requirement | |||||||||||
| Rail size | 50 kg/m | |||||||||||
| Rail length (mm) | Effective cutting length +3,500 | |||||||||||
| Vertical stroke (mm) | 250 | |||||||||||
| Overall machine length | 3,500 | |||||||||||
| Total length of the machine (mm)*1 | 4,930 | 5,430 | 5,930 | 6,330 | 7,030 | 7,730 | ||||||
Cooling water circulator specification
| Model | TF4000 | TF6000 |
|---|---|---|
| RKE-12000A-VTA | RKE-12000A-VTA | |
| Cooling capacity | ≧ 39.0kW | ≧ 39.0kW |
| External dimension (L x W x H) | 1,440 x 930 x 1,800 (mm) | 1,440 x 930 x 1,800(mm) |
| Dry weight/Water tank volume | 550Kg/160L | 550Kg/160L |
| Number of units | 1 | 2 |
Standard cutting specification
| Model | TF2000 | TF4000 | ||
|---|---|---|---|---|
| Mild steel material | Vertical cutting (mm) | 22 | 32 | |
| Front/Back V bevel 30 (mm) | 12 | 16 | ||
| Front/Back V bevel 45 (mm) | 9 | 12 | ||
| Stainless steel material(mm) | <1Mpa | Vertical cutting (mm) | 10 / (12*3) | 12(16*3) |
| ≧ 1MPa | Vertical cutting (mm) | 16 / (20*3) | 20 / (28*3) | |
| Front/back V bevel 22.5 | – | 12 | ||
| High quality cutting (mm) | – | 20*4 | ||
*1 Material: SS400(Middle Steel), Shape: ☐70mm×70mm (Corner part R5)
*2 Material: SUS304, Shape: ☐70mm×70mm(Corner part R5)
*3 The numerical value of () is the cutting specification for separate cutting. Dross may adhere to the product, so please check the sample.
*4 R processing is required for corners. In addition, the cutting quality may change depending on the stainless steel manufacturer, the material, and the condition of the steel plate.
Speed specification
| Processing feed speed (mm/min) | 1-6,000 |
| Rapid feed speed (mm/min) | 24,000 |
| Manual rapid feed speed (mm/min) | 12,000 |
| Cutting head approach speed (mm/min) | 20,000 |
| Cutting head lifting speed (mm/min) | 15,000 |
| Home return speed (mm/min) | 24,000 |
Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka
Related Products
-
Eight Tool 83XSB-2045 TORX
-
Tohnichi PCL Interchangeable Head Torque Wrenches
-
Vessel No.MTA20WSQ4L GO-TAN Tilt Mirror Socket Adapter 1/2 inch SQ 12.7mm Long
-
Kikusui Tape 183A Double-Coated Glue Tape (Black)
-
ShinMaywa BTR-S Series Submersible Drainage Pumps
-
Watanabe WPMZ-1 Graphical Digital Panel Meter (DC voltage/current measurement) – DC Meter
REQUEST QUOTATION
PAYMENT
LINK
