※１For sewing speed 6m/min. 150 b/h for sewing speed 8m/min.
Varies with the product and operating environments.
※２Contact us for applications involving common use of different bags, use of special bags, and bag dimensions and set weights outside the above range.

Names of Units

① Feeder
Bags are place neatly with top opening facing forward. The magazine holds approximately 50 bags.
② Pickup Unit
Bags are pick up one by one, turned 90 degrees, and set on the filling station.
③ Clamping Unit
Each bag is clamp at both edges with a 30mm wide clamp.
④ Bag Opening Unit
Suckers pull the bag mouth open with a vacuum generator. Timing is adjusted to each application.
⑤ Filling Station
Products is smoothly fill using the expansion spout.
⑥ Carrier Table and Bottom Tapper
The carrier table moves to the hopper position as filling starts. The bottom tapping plate supports and taps the bag from below to facilitate settling of product in the bag.
⑦ Bag Former and Gripper
After the gussets are stretch out, the bag mouth is neatly form and held between press bars to the hopper, and on the carrier table. The carrier table transports the bag to the closing station while being firmly gripp on both ends.
⑧ Sewing Machine (DS-6AC)
The sewing machine starts operation upon detecting an approaching bag and sews it closed during traverse. The grippers release the bag and the sewing machine stops upon detecting the trailing edge of the bag.
⑨ Discharge
The carrier table stops at a preset position. The bottom tapping plate inclines and the bag slides off the machine.

Outward Dimensions