Japan, NPK
NPK Hoists
Made in: Japan
Manufacturer: NPK
Hoists
The NPK Air Hoist is free from malfunction even if used in a location that is subject to high temperature and jumidity or exposed to heavy dust. The operating speed can be adjusted by manipulating the handle. Also, this hoist is internally equipped with a fine adjustment device.
Specification
＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)
| Model | Chain | Capacity | Standard lift | Lifting speed max. load | Mass | Air inlet thread | Hose size | Average air consumption |
| kg | mm | m/min | kg | Rc | mm | m3/min | ||
| RHL-250 | Link | 250 | 3.0 | 27 | 16 | 3/8 | 12.7 | 1.3 |
| RHL-500 | Link | 500 | 3.0 | 12.6 | 16 | 3/8 | 12.7 | 1.3 |
| RHL-1000 | Link | 1,000 | 3.0 | 5.7 | 22 | 3/8 | 12.7 | 1.3 |
| RHL-2800 | Link | 2,800 | 3.0 | 2.2 | 68.5 | G1 | 19 | 1.7 |
| RHL-250P | Link | 250 | 3.0 | 27 | 18 | 3/8 | 12.7 | 1.3 |
| RHL-500P | Link | 500 | 3.0 | 12.6 | 18 | 3/8 | 12.7 | 1.3 |
| RHL-1000P | Link | 1,000 | 3.0 | 5.7 | 23.5 | 3/8 | 12.7 | 1.3 |
| RHL-2800P | Link | 2,800 | 3.0 | 2.2 | 71.5 | G1 | 19 | 1.7 |
Related Products
-
SAKUSAKU SDH101262 Blade for Cut-off And Deep Grooving Height 26 / Maximum Cut-off Diameter φ50 / Applicable Insert Width 1.85-2.5
-
Tokyo Ko-on Denpa CP2500 Series Variable Potentiometer
-
Nabtesco Precision Reduction Gears
-
Urakawa ZTC50H×117-09A00010 ZTC Series JEC, JEM Certified Products
-
Nacol Base Mounting Plate
-
SANKO TITAN Hand Tightener HORIZONTAL LIFELINE
