Japan, Obishi Keiki
Obishi Keiki Seisakusho Center
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Standard Center (Hardened)
Supplied as part of the set in all our bench centers except ML-Type, VP-Type and VPG-Type.
Standard Center (with Carbide)
Supplied as part of the set in all our ML-Type, VP-Type and VPG-Type bench centers.
*According to your requirement, we can also manufacture special measurement, brolly center, with carbide and female center.
| Morse Taper | Standard Type | with Carbide | |||||
|---|---|---|---|---|---|---|---|
| Code No. | Measurement (φD×Lmm) | Weight (g) | Code NO. | Measurement (φD×Lmm) | Carbide Diameter (φa) | Mass (g) | |
| MT-1 | SAS106 | 12.2×66 | 50 | SAK901 | 12.2×82 | 6 | 65 |
| MT-2 | SAS146 | 18×90 | 150 | SAK902 | 18×100 | 8 | 175 |
| MT-3 | SAS176 | 24.1×113 | 350 | SAK903 | 24.1×125 | 10 | 380 |
Related Products
-
TSURUMI KTZ / KTZE SERIES Three Phase Submersible Pumps
-
Ross Asia Bantam series Port sizes from 1/8″ to 3/8″. Flow rates up to 23 scfm (651 l/min)
-
Vessel No.VCT-45 DC Type Controller
-
TSUBOSAN Engineer’s Type Half Round 200mm Bright-900 Series
-
Kondotec Stainless Wire Rope
-
KONAN YS202 Zero-differential Pressure Pilot-acting 2-port Solenoid Valves Normally Open Type
